Samsung SC-152GEBS - Manual (Page 15)

Specifications
SAMSUNG continually strives to improve its products. Both the design specifications and these user
instructions are thus subject to change without notice.
Technical Specifications
ITEM
Model Name SC-152 G
Disc
Disc types supported in
read mode CD-DA, CD-ROM Mode-1, CD-ROM XA Mode-2 Form-1, Form-2,
Photo-CD(Single, Multi-session), Video CD ready, CD-Plus, CD-Extra,
Enhanced CD, CDI/FMV, CD-R/RW
Disc diameter 120mm or 80mm
DRIVE PERFORMANCE
Data transfer rate
52X / Max. 7800KB/s
PIO Mode 4, DMA MW2, Ultra DMA (Option)
ACCESS TIME(typical) 85ms(typical)
Data Buffer capacity 128KB
Laser Semiconductor laser
Slide mechanism Gear motor
Spindle motor Brushless motor
Load mechanism Tray, DC motor(Soft Eject)
ERROR RATE
Mode-1 : 1block / 10 12 bits, Mode-2 : 1block / 10 9 bits
FRONT PANEL
Eject button Auto eject or Auto inject
Indicator(LED) POWER ON/BUSY
Headphone output Stereo mini-jack (Ø3.6mm) 0.60 ± 20%(Vrms) 33 ohm
Volume control Wheel type
REAR PANEL
Required power +5VDC, 1.3A, +12VDC, 1.5A
Interface connector ATAPI
Audio output Line out 0.7 ± 20%(Vrms) : 47Kohm
Jumper block Molex 70203 or other compatible models
OPERATING ENVIRONMENT
Operations Temperature: 5~45°C Humidity: 10~80%
Storage Temperature: -25~60°C Humidity: 10~90%
GENERAL
Dimensions 148.2(W) x 42(H) x 184(D)mm
Net weight 740g (set only)
RELIABILITY
MTBF 125,000 POH(Duty 20%)