Samsung SMX-K40LN-XAA - Manual (Page 30)

CONNECTING A POWER SOURCE
Be sure to charge the battery pack before you start using your camcorder.
Use the IA-BH130LB battery pack only.
The battery pack may be charged a little at the time of purchase.
Battery pack insertion/ejection
It is recommended you purchase one or more additional battery packs to allow continuous use of your camcorder.
Inserting the battery pack
1. Slide and open the battery slot cover as shown in the fi gure.
2. Insert the battery pack into the battery slot until it locks.
Make sure that the SAMSUNG logo is facing up while
the battery pack is placed as shown in the fi gure.
3. Slide and close the battery slot cover.
Ejecting the battery pack
1. Pull the ejected battery out in the direction as shown in the
fi gure.
2. Slide and close the battery slot cover.
•
•
•
•
Remove the battery pack separately from the camcorder
while not in use.
We recommend preparing an additional battery pack for
prolonged outdoor use.
Additional battery packs can be purchased from samsungparts.com.
•
•
•
preparation
Insert
Eject
16_English