Samsung SMX-K40LN-XAA - Manual (Page 99)

English _85
File No.
File numbers are assigned to recorded files in the order they were recorded.
settings contents
on-screen
display
"Series"
Assigns file numbers in sequence even if a memory card is replaced with another one or after
formatting, or after deleting all files. The file number is reset when a new folder is created.
None
"Reset"
Resets the file number to 0001 even after formatting, deleting all files or inserting a new memory
card.
None
When you set "FileNo." to "Series", each file is assigned with a different number so as to avoid duplicating file names. This is
convenient when you want to manage your files on a PC.
Format
Use this function if you want to delete all files completely or to correct problems on the storage media. 
settings contents
on-screen
display
"Memory"
(SMX-K44/K45only)
Formats the built-in memory. None
"Card" Formats a memory card. None
DonotformatthestoragemediaonaPCorotherdevice.
Make sure to format the storage media on this camcorder.
Format the memory card in the following cases:
- before using a new memory card
- a memory card formatted/recorded on other devices
- when this camcorder cannot read the memory card
A memory card with the protection tab set to lock will not be formatted.
If there is no storage media inserted, it can not be selected. Then it will be dimmed on the menu.
•
•
•
•
WARNING
Do not remove the recording medium or perform any other operation (such as turning off the power) during formatting.
Also, be sure to use the provided AC adapter, as the recording medium may be corrupted if the battery becomes
exhausted during formatting.
If the recording medium becomes corrupted, format it again.
•
•