Samsung RF267AASH-XAA - Manual (Page 17)

Setting Up _1
01
setting
u
P
ADJusting tHe FReezeR DRAweR LeVeL
1. Locate the height-adjuster ( 1 ) in the freezer drawer.
Unscrew the four Phillips screws (  ) slightly to loosen the door.
2. Loosen the controller screw(  ) with a Phillips
screwdriver.
3. Find the best level to align the door slope.
After adjustment, tighten the screws ( 
)&(

) in reverse order.
Example) The slope is about 2mm (0.08inch) as shown below.
- Rotate the Height Adjuster to +2.0 to reduce the door
slope.
Slope
Reference
plane
Freezer Drawer
Adjustment part
1