Samsung SGH-C225NBATMB User Manual

Samsung Mobile Phones

Advertising

DUAL BAND GPRS Series

SGH-C225

Portable Digital Telephone

User Manual

Please read this manual before operating your

phone, and keep it for future reference.

Printed in Korea

Code No.: GH68-05544A

English.08/2004

UVDF4_wbc225_082004_F2

Advertising

Table of contents

Document Outline

Intellectual Property
Samsung Telecommunications America, L. P.
Unpacking
Your Phone
- Phone Layout
Display
- Display Layout
Getting Started
- Installing the SIM Card
  - 1. If necessary, switch off the phone by holding down the key until the power-off image is displayed.
- Charging a Battery
  - 1. With the battery in position on the phone, connect the lead from the travel adapter to the bottom of the phone.
    - 2. Connect the adapter to a standard AC wall outlet.
    - 3. When charging is finished, disconnect the adapter from the power outlet and from the phone by pressing the grey tabs on both sides of the connector and pulling the connector out.
- Switching the Phone On/Off
  - 1. Hold down the key until the phone switches on.
- Locking or Unlocking the keypad
Call Functions
- Making a Call
  - 1. Press and hold down the 0 key. The + character appears.
    - 2. Key in the country code, area code and phone number and press the key.
  - 1. If you have typed any characters on the display, clear the display by holding down the key for more than one second.
    - 2. Press the key to display a list of the last numbers in the order in which the calls were made.
    - 3. Use the and keys to scroll through the numbers until the required number is highlighted.
- Adjusting the Volume
- Answering a Call
  - 1. Press the key or the Accept soft key to answer the incoming call.
    - 2. If the Anykey Answer option in the Extra Settings menu (Menu 5.6) is checked, you can press any key to answer a call except for the key and the Reject soft key (see “Extra settings” on page 86).
    - 3. End the call by pressing the key.
- Viewing Missed Calls
- To view the missed call immediately
- Switching Quickly to the Silent Mode
Selecting Functions and Options
- 1. Press the appropriate soft key.
- Example: Setting the Display Language
  - 1. When the idle screen is displayed, press the Menu soft key to access the menus.
Phonebook
- Storing a Number with a Name
  - 1. Key in the number to be stored.
  - 1. When the idle screen is displayed, press the Ph.Book soft key.
- Using Phonebook Entry Options
- Searching for and Dialing a Number in the Phonebook
  - 1. When the idle screen is displayed, press the Ph.Book soft key. When Search is highlighted, press the Select soft key. You are asked to enter a name.
  - 1. When the idle screen is displayed, select the Ph.Book soft key to scroll to Group Search by pressing the or key and press the Select soft key. You are asked to enter a group name.
- Editing a Caller Group
  - 1. When the idle screen is displayed, select the Ph.Book soft key to scroll to Group Edit by pressing the 4 or key and press the Select soft key.
- Speed-Dialing
  - 1. When the idle screen is displayed, select the Ph.Book soft key to scroll to Speed Dial by pressing the 5 or key and press the Select soft key.
- Deleting All Phonebook Entries
  - 1. When the idle screen displays, press the Ph.Book soft key.
- Checking Memory Status
  - 1. When the idle screen is displayed, select the Ph.Book soft key to scroll to Memory Status option pressing the 7 or key and press the Select soft key.
    - 2. Press the or keys to view the number of existing and remaining entries in the card and phone memories.
Entering Text
- Changing the Text Input Mode
- Using the T9 Mode
  - 1. When you are in the T9 predictive text input mode, start entering a word by pressing keys 2 to 9. Press each key only once for one letter.
- Using the Upper/Lower-Case Character Mode
  - 1. Press the key labeled with the required letter:
    - 2. Select the other letters in the same way.
- Using the Symbol Mode
- Using the Number Mode
In-Call Options
- Putting a Call on Hold
  - 1. Key in the phone number that you wish to dial or look it up in the phonebook.
    - 2. Press the key to dial the second call.
    - 3. The first call is automatically put on hold.
  - 1. Put the current call on hold by pressing the Hold soft key.
    - 2. Make the second call in the normal way.
- Switching the Microphone Off (Mute)
  - 1. Press the Options soft key.
    - 2. If necessary, press the key to highlight the Mute option.
    - 3. Press the OK soft key.
  - 1. Press the Options soft key.
    - 2. If necessary, press the key to highlight the Unmute option.
    - 3. Press the OK soft key.
- Muting/Sending DTMF
- Sending a Sequence of DTMF Tones
  - 1. When you are connected to the teleservice system, press the Options soft key.
    - 2. Press the Down key to highlight the Send DTMF option.
    - 3. Press the OK soft key.
- Searching for a Number in the Phonebook
  - 1. Press the Options soft key.
- New Call
- Answering a Second Call
  - 1. Press the key to answer the incoming call. The first call is automatically put on hold.
    - 2. To switch between the two calls, press the Swap soft key.
    - 3. To end the current call, press the key.
- Making a Multiparty Call
Using the Menus
- Accessing Menu Functions by Scrolling
  - 1. In idle mode, press the Menu soft key to access the menu facility.
    - 2. Scroll with the or key to reach the required main menu, Phone Settings for example. Press the Select soft key or the key to enter the menu.
    - 3. If the menu contains any sub-menus, Language for example, you can access them by scrolling with the or key and pressing the Select soft key.
- Accessing Menu Functions by Using Shortcuts
  - 1. Press the Menu soft key.
    - 2. Press 5 for Phone Settings.
    - 3. Press 4 for Language.
- List of Menu Functions
Text Messages
- 1. Select the required box and press the Select soft key.
  - 2. Select the required message and press the View soft key to view the message contents.
  - 3. To scroll through the message, press the or key.
- Create
  - 1. Create your message as required.
  - 1. Create your message as required.
- Inbox
  - 2. To scroll through the contents, press the Up or Down key.
  - 3. To scroll to the previous or next message, press the or key.
- Outbox
  - 2. To scroll through the contents, press the Up or Down key.
  - 3. To scroll to the previous or next message, press the or key.
- Templates
- Settings
- Delete all
- Memory status
- Voice mail
- Broadcast
Picture messages
- Create
  - 1. Enter the subject of your message and press the OK soft key.
- Inbox
  - 1. Press the View soft key to view the message.
    - 2. To scroll through the message information, press the Up or Down key.
  - 1. Select a message and press the Select soft key to view the message.
    - 2. To scroll through the message, press the Up or Down key.
    - 3. Press the OK soft key on the message presentation screen.
- Outbox
  - 1. Select a message and press the Select soft key to view the message contents.
    - 2. To scroll through the message, press the Up or Down key.
    - 3. Press the OK soft key on the message presentation screen.
- Draft
- Templates
- Delete all
- Memory status
Call records
- Missed calls
- Incoming calls
- Outgoing calls
- Delete all
- Call time
Sound settings
- Ring tone
- Ring volume
- Alert type
- Keypad tone
- Message tone
- Alert on Call
- Power On/Off
- Extra tones
Phone settings
- Display settings
  - 1. Scroll through the list by pressing the or key.
  - 1. Adjust the contrast by using the and navigation keys or the Volume keys on the left side of the phone.
    - 2. When you are satisfied, press the OK soft key to save the selection.
- Greeting message
- Own number
- Language
- Security
- Extra settings
- Short cut
  - 1. Select the key to be used as a shortcut key by pressing the or key, followed by the Select soft key.
    - 2. Select the menu option to be assigned to the key by pressing the or key.
    - 3. Press the Select soft key to save the selection.
- Reset settings
  - 1. Select the Reset settings menu option.
    - 2. Enter the 8-digit phone password and press the OK soft key.
Organizer
- Alarm
  - 1. Choose the type of alarm to be set.
- Calendar
  - 1. Select the required date in the calendar, using the navigation keys.
  - 1. To edit a memo, select the Calendar menu option.
    - 2. Press the Options soft key.
    - 3. Select the Edit menu option and edit the memo appropriately.
- Time & date
  - 1. Select the city corresponding to your time zone by pressing the and key one or more times.
    - 2. Press the Set soft key.
- Calculator
  - 1. Enter the first number using the numeric keys.
- To do list
  - 1. Press the New soft key.
- Voice memo
  - 1. Replay
  - 1. Play
- Currency exchange
  - 1. Enter the current exchange rate of your source currency and press the OK soft key.
    - 2. Enter the amount for which you wish to conduct the currency conversion and press the OK soft key.
    - 3. Press the soft key to exit the currency convertor.
Network Services
- Call forwarding
  - 1. Select the type of call forwarding required by pressing the or key until the appropriate option is highlighted, and then press Select.
    - 2. Select the type of calls to be forwarded by pressing the or key until the appropriate option is highlighted and then press Select.
    - 3. Enter the number to which the calls are to be forwarded and press OK. To enter the international code, press the 0 key until the + sign is displayed.
- Call waiting
  - 1. Select the type of calls to which the call waiting option is to be applied by pressing the or key until the appropriate option is highlighted and then press the Select soft key.
    - 2. You can activate or deactivate the call waiting feature as necessary by using the Activate or Deactivate soft key respectively.
- Network selection
  - 1. When Network selection is displayed, press the Select soft key.
    - 2. Press the or key until the appropriate option is highlighted and then press the OK soft key.
    - 3. Press the or key until the preferred network is highlighted and then press the OK soft key.
- Caller ID
Funbox
- t-zones
  - 1. Select an empty location and press the Options soft key.
    - 2. Enter the address and press the Enter soft key.
    - 3. Enter a name for the favorite item and press the Enter soft key.
- Games
- Sounds
- Images
- Delete all
- Memory status
AIM
- Sign on
  - 1. Use the Up or Down navigation keys to select the Sign on menu option. Press the Select soft key.
    - 2. Enter your Screen name and press the OK soft key. Enter your password and press the OK soft key.
- Offline convs.
- Settings
- Help
- Sign off
Solving Problems
Access Codes
- Phone Password
- PIN
- PUK
  - 1. Key in the PUK and press the OK soft key.
    - 2. Enter a new PIN of your choice and press the OK soft key.
    - 3. When the Confirm New PIN message is displayed, key in the same code again and press the OK soft key.
- PIN2
- PUK2
  - 1. Key in the PUK2 and press the OK soft key.
    - 2. Enter a new PIN2 of your choice and press the OK soft key.
    - 3. When the Confirm PIN2 message is displayed, key in the same code again and press the OK soft key.
WAP Browser
- About the WAP Browser
  - 1. When the idle Screen is displayed, press the Menu soft key to enter the menu mode.
- Using the WAP Browser
  - 1. Press and hold down the key. A menu is displayed.
Health and Safety Information
- Exposure to Radio Frequency (RF) Signals
- For Body Operation
- Precautions When Using Batteries
- Road Safety
  - 1. Get to know your wireless phone and its features, such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.
- Operating Environment
- Electronic Devices
- Potentially Explosive Environments
- Emergency Calls
  - 1. If the phone is not on, switch it on.
    - 2. Key in the emergency number for your present location (for example, 911 or other official emergency number). Emergency numbers vary by location.
    - 3. Press the key.
- Other Important Safety Information
- Care and Maintenance
- Acknowledging Special Precautions and the FCC and Industry Canada Notice
  - 1. This device may not cause harmful interference, and
    - 2. This device must accept any interference received.
Appendix A: CERTIFICATION INFORMATION (SAR)
Appendix B: Guide to Safe and Responsible Wireless Phone Use
- 1. Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and le...
Appendix C: Consumer Update on Wireless Phones
- 1. What kinds of phones are the subject of this update?
Glossary
Index
- A
- B
- C
- D
- E
- F
- G
- H
- I
- K
- L
- M
- N
- O
- P
- R
- S
- T
- U
- V
- W

Popular Brands

Popular manuals