Samsung LS22B350HS-ZA - Manual (Page 14)

Installing the Product 2-2
2-2 Installing the Stand
Before assembling the product, put the product down on a flat and stable surface (table, etc.) with the screen facing down.
Lay a soft blanket on the table for protection. Next, place the product with the screen fac-
ing down onto the blanket.
Insert the Stand Connector into the Stand in the direction shown by the figure.
Check if the Stand Connector is firmly connected.
Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
Hold the main body of the product with your hand as shown by the figure.
Push the assembled stand into the main body in the direction of the arrow as shown in the
figure.