Samsung SCH-R400ZPAMTR - Manual (Page 28)

28
4. Say “Yes” to confirm the name or “No” to hear the next name, or use the
keypad to select the correct name from the list. (See “Choice Lists” on
page 94, for more information.)
• Press the Repeat (right) soft key ( ) to say the name again.
• Press the Settings (left) soft key ( ), then press the Exit right soft key ( )
to exit VoiceSignal without dialing.
If the recognized name has multiple numbers stored for it (that is, Mobile,
Work, Home, and so on), Voice Dial displays the possible choices and
prompts you with “Which number?”
5. Say one of the following number types:
• “Home”
• “Work”
• “Mobile”
• “Pager”
Voice Dial dials the specified number.
Dialing a Number
To dial a number using Voice Dial, do the following:
1. In standby mode, press and hold the key.
“Say a Command” appears in the display and is pronounced through the
speaker.
2. Say “Call”.
VoiceSignal prompts you to “Say the name or number.”
3. Speak clearly and say the telephone number of the person you want to call.
For example, say “7 8 1 9 7 0 5 2 0 0."
If it recognizes the number, Voice Dial repeats it and dials the number. If
Voice Dial is not sure it has recognized the number, it displays a choice list
of up to three numbers and prompts you with “Did you say?” followed by
the first number on the list.
4. Say “Yes” to confirm the number or “No” to hear the next one, or use the
keypad to select the correct number from the list. (See See “Choice Lists”
on page 94, for more information.)
• Press the Repeat (right) soft key ( ) to say the name again.
• Press the Settings (left) soft key ( ), then press the Exit right soft key ( )
to exit VoiceSignal without dialing.