Samsung SCH-R400ZPAMTR - Manual (Page 29)

Call Functions 29
Answering a Call
Pause Dialing From a Contacts Entry
• If you voice dial a contact that contains 2-Sec Pause(s) simply wait for the pauses
to pass and the dialing to complete.
• If you voice dial a contact that contains Wait(s), wait for the appropriate prompt(s)
from the number you are calling (credit card number, bank account number, and
so on) and enter the appropriate response(s).
Answering a Call
Incoming
When you receive a call, the phone displays one of the following:
• If the caller can be identified, the caller’s number (or name if it’s in your Contacts)
appears in the display.
• If the caller cannot be identified, Call from unavailable #, Call from restricted #,
or no number appears in the display.
Tip: Assign pictures to Contacts entries. The entry’s assigned picture appears in the display when you
receive a call from that entry. See “Assigning a Picture to a Contacts Entry” on page 57.
The phone continues to notify you of the call until one of the following events occur:
• You answer the call.
• The calling party ends the call.
• The call is sent to voicemail.
Call Notification Features
Your phone notifies you of a call in a variety of ways.
• Eight ring volume settings: Ringer Off, Vibrate, Low, Low/Medium, Medium,
Medium/High, High, or Vibrate/High.
• Different ring types or melodies to distinguish callers.
• Name display with caller ID. (If the caller’s name is programmed into your
Contacts).
• Information about the last 90 each of incoming, missed, and outgoing calls are
automatically stored to a call log.
Set Call Ringer Volume
1. In standby mode, press the Volume key on the left side of the phone.
2. Press the Volume key up or down to set the call ringer volume as desired.