Disc storage & management, Handling cautions, Using the 3d function – Samsung BD-HM59-ZA User Manual

Page 3: Copyright

Advertising
background image

12.●Use only with the

cart, stand, tripod,

bracket, or table

specified by the

manufacturer, or sold

with the apparatus.

When a cart is used,

use caution when moving the cart/

apparatus combination to avoid injury

from tip-over.

13.●Unplug this apparatus during lightning

storms or when unused for long periods

of time.

14.●Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as when the power-supply

cord or plug is damaged, liquid has

been spilled or objects have fallen into

the apparatus, the apparatus has been

exposed to rain or moisture, does not

operate normally, or has been dropped.

Disc Storage & Management

Holding Discs

- Fingerprints or scratches

on a disc may reduce

sound and picture quality or cause

skipping

- Avoid touching the surface of a disc

where data has been recorded.

- Hold the disc by the edges so that

fingerprints will not get on the surface.

- Do not stick paper or tape on the disc.

Cleaning Discs

- If you get fingerprints or

dirt on a disc, clean it with

a mild detergent diluted in

water and wipe with a soft

cloth.

- When cleaning, wipe gently from the

inside to the outside of the disc.

Disc Storage

` Do not keep in direct sunlight.

` Keep in a cool ventilated area.

` Keep in a clean protection jacket and

store vertically.

Handling Cautions

Do not expose this apparatus to

dripping or splashing. Do not put

objects filled with liquids, such as vases

on the apparatus.

To turn this apparatus off completely,

you must pull the power plug out of

the wall socket. Consequently, the

power plug must be easily and readily

accessible at all times.

Do not plug multiple electric devices

into the same wall socket. Overloading a

socket can cause it to overheat, resulting

in a fire.

Before connecting other components to
this player, be sure to turn them off.

If you move your player suddenly from a
cold place to a warm place, condensation
may occur on the operating parts and
lens and cause abnormal disc playback.
If this occurs, unplug the player, wait for
two hours, and then connect the plug to
the power outlet. Then, insert the disc,
and try to play back again.

If the product makes an abnormal noise

or produces a burning smell or smoke,

turn off the power switch immediately

and disconnect the power plug from the

wall outlet. Then, contact the nearest

customer service center for technical

assistance. Do not use the product.

Using the product as it is may cause a

fire or an electric shock.

Using the 3D function

IMPORTANT HEALTH AND SAFETY
INFORMATION FOR 3D PICTURES. Read
and understand the following safety
information before using the 3D function.

Some viewers may experience
discomfort while viewing 3D TV such as
dizziness, nausea, and headaches.
If you experience any such symptom,
stop viewing 3D TV, remove the 3D
Active Glasses, and rest.

Watching 3D images for an extended
period of time may cause eye strain. If
you feel eye strain, stop viewing 3D TV,
remove your 3D Active Glasses, and
rest.

A responsible adult should frequently
check on children who are using the 3D
function.
If there are any reports of tired eyes,
headaches, dizziness, or nausea, have
the child stop viewing 3D TV and rest.

Do not use the 3D Active Glasses
for other purposes (Such as general
eyeglasses, sunglasses, protective
goggles, etc.).

Do not use the 3D function or 3D
Active Glasses while walking or moving
around. Using the 3D function or 3D
Active Glasses while moving around may
cause you to bump into objects, trip,
and/or fall, and cause serious injury.

If you want to enjoy 3D content,
connect a 3D device (3D compliant AV
receiver or TV) to the player's HDMI OUT
port using a high-speed HDMI cable.
Put on 3D glasses before playing the 3D
content.

The player outputs 3D signals only
through HDMI cable connected to the
HDMI OUT port.

As the video resolution in 3D play mode
is fixed according to the resolution
of the original 3D video, you can
not change the resolution to your
preference.

Some functions such as BD Wise,
screen size adjustment, and resolution
adjustment may not operate properly in
3D play mode.

You must use a high-speed HDMI cable
for proper output of the 3D signal.

Stay at least three times the width of the
screen from the TV when watching 3D
images. For example, if you have a 46-
inch screen, stay 138 inches (11.5 feet)
from the screen.

Place the 3D video screen at eye level
for the best 3D picture.

When the player is connected to some
3D devices, the 3D effect may not
function properly.

This player does not convert 2D content
into 3D.

"Blu-ray 3D" and "Blu-ray 3D" logo
are trademarks of the Blu-ray Disc
Association.

Copyright

© 2014 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of

this user's manual may be reproduced

or copied without the prior written

permission of Samsung Electronics Co.,Ltd.

3

Advertising
This manual is related to the following products: