Samsung LS17MHNSSZ-XAA - Manual (Page 39)

Less than 43W
Power Saving
Less than 2W
Dimensions (WxDxH)/ Weight
389 x 206 x 402.5 mm / 15.3 x 8.1 x 15.8 inch
389 x 63 x 386mm / 15.3 x 2.5 x 15.2 inch ( Without Stand )
VESA Mounting Interface
75mm x 75mm
Environmental considerations
Operating Temperature: 50°F to 104°F(10°C to 40°C)
Humidity: 10% to 80%, Non-condensing
Storage Temperature: -4°F to 113°F (-20°C to 45°C)
Humidity: 5% to 95%, Non-condensing
Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer
systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will
proceed automatically, unless the user wishes to select alternate settings.
Design and specifications are subject to change without prior notice.
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves energy by
switching your monitor into a low-power mode when it has not been used for a certain amount of time. The
monitor automatically returns to normal operation when you press a key on the keyboard. For energy
conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The
PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use a
software utility installed on your computer to set up this feature.
State Normal Operation
Power saving mode
EPA/ENERGY 2000
Power off
(Power-switch off)
Power Indicator Green Green Blinking Black
Power Consumption
Less than 43W
(on mode)
Less than 2W
(Off-mode)
Less than 1W
(115Vac)
This monitor is EPA ENERGY STAR ® compliant and ENERGY2000
compliant when used with a computer equipped with VESA DPMS
functionality.
As an ENERGY STAR
®
Partner, SAMSUNG has determined that this
product meets the ENERGY STAR
®
guidelines for energy efficiency.
Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will
be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on.
Refer to the video card manual and adjust the screen as follows.
Table 1. Preset Timing Modes