Samsung VC12F50PRJC-AA - Manual (Page 21)

troubleshooting _21
04
TROUBLESHOOTING
troubleshooting
PROBLEM SOLUTION
Motor does not start.
• Check cable, pulg and socket.
• Leave to cool.
Suction force is gradually
decreasing.
• Check for blockage and remove.
Cord does not rewind
fully.
• Pull the cord out 2-3 m and push down the cord rewind button.
Vacuum cleaner does not
pick up dirt.
• Check hose and replace if required.
Low or decreasing
suction. • Please check filter and, if required, clean as illustrated in the
instructions. if filters are out of condition change them to new ones.
Body overheating. • Please check filters, if required clean as illustrated in the instruction.
Static electicity
discharge.
• Please decrease power suction.
• This can also occur when air in the room is very dry.
Please ventilate the room to air humidity become a normal.