Samsung DVD-R120-XAX - Manual (Page 43)

English - 43
R
ecording
●
Source: The video input source (L1, L2), or the
broadcasting channel you want to make a timer
recording of. When selecting channels to be recorded, the
…† buttons on the remote control can let you select only
the channels that have been memorized during Auto Scan.
For the selection of other channels, use the number buttons.
●
Date: Date that the timer recording starts
01/01 Every Day
01/02 MON-SAT
MON-FRI
01/30 Every SAT
01/31
Every SUN
● Start/End Time: Start and end time of the timer recording
● Mode (Recording mode)
XP (High quality): Approx. 1 hour
SP (Standard quality): Approx. 2 hours
LP (Long recording): Approx. 4 hours
EP (Extended): Approx. 6 hours or 8 hours.
FR (Flexible Recording): See page 44.
7 Press the ENTER button.
● ( ) and Timer Set will appear on the front panel
display. This means that a timer recording is set.
● Recording is automatically performed when the set
time is reached.
Setting a Timer Recording
You need to set clock (Setup – Clock Set) before
proceeding with a timer recording. (See page 29)
1 Press the OPEN/CLOSE button, and place a
recordable disc on the disc tray.
2 Press the OPEN/CLOSE button to close the
disc tray.
Wait until “LOAD” disappears from the front panel
display.
If an unused DVD-RAM disc is used, whether to format
or not will be asked first. (See page 37)
If an unused DVD-RW disc is used, whether to initialize
or not will be asked first. (See page 37)
3 Press the MENU button in stop mode.
You can also set a timer recording via the TIMER
button.
4 Press the …† buttons to select Timer Rec.,
and then press the ENTER or √ button.
5 Press the …† buttons to select Timer
Record, and then press the ENTER or √
button.
The Timer Record Input items are displayed.
6 Fill in the items using the …†œ √ buttons.
œ √ : Moves to the previous/next item,
…† 0~9 : Sets a value.
RETURN SELECT MOVE EXIT
Timer Record DVD-RAM(VR)
Timer Record √ √
Scheduled Record List √ √
■ When you are recording at EP mode on a
DVD-RW(V)/R disc, it may not record the
full 6 or 8 hours because the unit uses the
VBR(Variable Bit Rate) ENCODING system.
For example, if you record a program with a
lot of action, it uses a higher bit rate which
in turn consumes more disc memory.
NOTE
■ If you make a mistake
Press the œ √ button to select the item
you want to change.
■ If the timer settings overlap
The programs are recorded in order of
priority. If timer recording is set for the
first program and then again for the
second program and both programs
overlap, the following message will appear
on the screen: ‘This setting is identical
with 1’ The message shows that the first
program has priority.
After recording of the first program is
complete, the second program starts being
recorded.
■ To exit without saving the current
setting
Press the MENU or TIMER button.
■ To return to the previous menu
Press the RETURN button if you don't
want to set a timer recording.
NOTE
Title List
Playlist
Disc manager
Timer Rec.
Setup
RETURN SELECT MOVE EXIT
Scheduled Record List DVD-RAM(VR)
No. Source Date Start End Mode Edit
Recordable Time 02:12 SP
01 -- -- --/-- --:-- -- --:-- -- -- √ √
RETURN SELECT MOVE EXIT
Scheduled Record List DVD-RAM(VR)
Recordable Time 02:12 SP
No. Source Date Start End Mode Edit
01 CH 09 01/01 12:00 AM 02:00 AM SP √ √
02 -- -- --/-- --:-- -- --:-- -- -- √ √
No. 01
Source Date Start End Mode
CH 09 01/01 12 : 00 AM 02 : 00 AM SP
Recordable Time 02:12 SP
...
...
AK68-00683A-04(36~46) 2005.9.28 5:24 AM Page 43