Samsung DVD-R120-XAX - Manual (Page 46)

46 - English
R
ecording
Recording the Scheduled
Record List
1 When the start time set in the Scheduled
Record List arrives, if the set is powered off,
the set will be automatically powered on and
starts recording. If the set is already powered
on, a message asking to confirm to proceed
or cancel the timer recording appears.
●
When “Yes” is selected: Cancel
●
When “No” is selected: Recording
2 Thirty seconds before the stop time, a
message that asks whether to automatically
power off or not after recording is displayed.
● When “OK” is selected: Power on after recording
● If there is no entry: Auto power off
To stop Recording
Press the STOP( ) button, and a message that asks
whether to end recording or not will be displayed.
● When “Yes” is selected: Recording stops
● When “No” is selected: Recording continues
Timer Recording is going to be started soon.
Do you want to cancel timer recording?
Yes No
Do you want to stop recording?
Yes No
Timer Recording is going to be ended soon
and power will be turned off automatically.
Press [ENTER] to continue to use DVD-Recorder.
OK
■ If there is not enough disc space or a
copy prevention signal is received during
recording, recording will stop.
■ If there is no free disc space or the disc is
not recordable, recording will not operate.
(You can record after replacing the disc.)
NOTE
You cannot record copy protected movie.
■ If you are not present to set Yes or No,
recording will still begin automatically.
NOTE
■ If you are not present to select OK, the
unit will power off automatically after the
recording finishes.
NOTE
AK68-00683A-04(36~46) 2005.9.28 5:24 AM Page 46