Samsung FPT5084X-XAA - Manual (Page 14)

English - 14
Connecting an Amplifier/DVD Home Theater
1 Connect Audio Cables
between the AUDIO OUT
[R-AUDIO-L] jacks on the TV
and AUDIO IN [L-AUDIO-R]
jacks on the Amplifier/DVD
Home Theater.
When an audio amplifier is
connected to the “AUDIO
OUT [R-AUDIO-L]” jacks:
Decrease the gain (volume)
of the TV, and adjust the
volume level with the
Amplifier’s volume control.
➢ Each Amplifier/DVD Home Theater has a different back panel configuration.
➢ When connecting an Amplifier/DVD Home Theater, match the color of the
connection terminal to the cable.
Amplifier/DVD Home Theater
TV Rear Panel
Audio Cable (Not supplied)
Connecting a PC
Using the D-Sub Cable
1 Connect a D-Sub Cable
between PC IN [PC] jack on
the TV and the PC output
jack on your computer.
2 Connect a PC Audio Cable
between the PC IN [AUDIO]
jack on the TV and the Audio
Out jack of the sound card on
your computer.
Using the HDMI/DVI Cable
1 Connect a HDMI/DVI cable
between the [HDMI IN 1] jack
on the TV and the PC output
jack on your computer.
2 Connect a 3.5 mm Stereo plug
to 2 RCA cable between the
DVI IN (HDMI 1) [R-AUDIO-L]
jack on the TV and the Audio
Out jack of the sound card on
your computer.
➢ Each PC has a different back panel configuration.
➢ When connecting a PC, match the color of the connection terminal to the cable.
➢ When using an HDMI/DVI cable connection, you must use the HDMI IN1 terminal.
PC
TV Rear Panel
PC Audio Cable (Not supplied) 2
D-Sub Cable (Not supplied) 1
Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
1 Connect an Optical Cable
between the DIGITAL AUDIO
OUT (OPTICAL) jacks on
the TV and the Digital Audio
Input (OPTICAL) jacks on the
Digital Audio System.
When a Digital Audio System
is connected to the “DIGITAL
AUDIO OUT (OPTICAL)”
jack:
Decrease the gain (volume)
of the TV, and adjust the
volume level with the
system’s volume control.
What is OPTICAL?
• An optical cable converts an electric signal into an optical light signal, and transmits
it through glass fibers. S/PDIF is a transmission system of digital audio in the form of
a light wave that uses a glass conductor.
➢ 5.1CH audio is possible when the TV is connected to an external device
supporting 5.1CH.
➢ Each Digital Audio System has a different back panel configuration.
➢ When the COMPONENT IN or HDMI IN jacks are connected, the Optical jack
on the TV does not output audio. If you want to hear audio, connect the DIGITAL
AUDIO OUT (OPTICAL) jack on the DVD player or Cable/Satellite Box directly to
an Amplifier or Home Theater, not the TV.
Digital Audio System
TV Rear Panel
Optical Cable (Not supplied)
Using the D-Sub Cable
Using the HDMI/DVI Cable TV Rear Panel
PC
3.5 mm Stereo plug to 2 RCA Cable (Not supplied) 2
HDMI/DVI Cable (Not supplied) 1
BN68-01094P-00Eng.indb 14 2007-04-13 ¿АИД 5:31:08