Samsung FPT5084X-XAA - Manual (Page 33)

English - 33
Changing the Position of the PIP Window
4 Press the ▲ or ▼ button to select Position, then press the ENTER button.
Press the ▲ or ▼ button to select the desired PIP window position, then press
the ENTER button.
➢ In Double Window ( ) and Double Wide ( ) modes, Position cannot
be selected.
➢ If the PIP window is set to Double Window ( ) or Double Wide ( )
mode, the screen size or alignment may slightly differ depending on the
signal type.
Changing the PIP Channel
5 Press the ▲ or ▼ button to select Channel, then press the ENTER button.
Press the ▲ or ▼ button at the bottom of the remote to select the desired
channel in the PIP window, then press the ENTER button.
➢ MAIN: PC / HDMI 1,2,3 / Component 1,2
PIP: TV(Analog)
Press the EXIT button to exit.
Press the PIP CH and CH buttons on the remote control to change the PIP
channel.
Freezing the Current Picture
1 Press the STILL button to freeze a moving picture.
➢ Normal sound will still be heard. Press again to cancel.
➢ To prevent screen burn-in, this function will automatically cancel after 5
minutes.
➢ While V-Chip is in operation, the Still function cannot be used.
PIP : On
Size :
Position :
Channel : DTV Air 3 - 0
PIP T V
Enter Move Return
PIP : On
Size :
Position :
Channel : DTV Air 3 - 0
PIP T V
DTV Air 3 - 0 ▲
▲
Enter Move Return
BN68-01094P-00Eng.indb 33 2007-04-13 ¿АИД 5:31:43