Connecting to av devices – Samsung SC-DX103-XAP User Manual

Page 98

Advertising
background image

88_ English

DUBBING IMAGES FROM THE CAMCORDER TO A VCR OR DVD/HDD RECORDER

You can dub images played back on this DVD camcorder onto other video

devices, such as VCRs or DVD/HDD recorders. Use the provided AV cable to

connect the DVD camcorder to another video device as shown in the following

figure:

1. Slide the POWER switch downwards to turn the power on, then open the

LCD screen. page 21

• Set the appropriate storage media. (SC-DX103/ DX105 only)

page 30

2. Press the MODE button to set the Play mode.

3. Use the Joystick to select the recorded (dubbed) image in the thumbnail

index view, then press the Joystick.

4. Press the record button on the connected device.

• The DVD camcorder will start playback and the recording device will

dub it.

• Refer to “Editing chapter” to create a playlist by selecting desired scenes from those recorded on this DVD

camcorder. pages 40~46

• Audio is heard from the speaker. If the volume is too high, noise may enter the dubbed image.

• Be sure to use the AC power adaptor to power the DVD camcorder to prevent battery power from shutting

off during recording on another video device.

����

VCRs or DVD/HDD recorders

Signal fl ow

AV cable

DVD camcorder

connecting to AV devices

(AD68-02550A) SC-DX100_ENG_IB.indb 88

2008-03-10 ¿АИД 4:20:02

Advertising
This manual is related to the following products: