Samsung DVD-V8500-XAA - Manual (Page 21)

ENG-21
I
N I T I A L
S
E T U P
Setting the Clock
This menu is used to set the current time. You need to set the time to use timer recording.
Setting the Clock Automatically
1
Press the MENU button.
2
Press the …/† buttons to
select Setup, then press the √
or ENTER button.
3
Press the …/† buttons to
select Clock, then press the √
or ENTER button.
4
Press the …/† buttons to
select Auto Clock, then press
the √ or ENTER button.
5
Select a channel that carries a
time signal by using the √ or
ENTER button.
(Auto, 1, 2, ...., 125)
Notes
You must have the antenna connected to set
the Auto Clock. (See pages 11~12)
The Clock will be automatically set when you
turn off the DVD-VCR.