Identifying vcr problems, Action problem page – Samsung DVD-V8500-XAA User Manual

Page 83

Advertising
background image

ENG-83

R

E F E R E N C E

Forgot password

The screen is
blocked

If you experience
other problems.

• Press the œœ √√ buttons simultaneously for more than 5 seconds

with no disc in the unit. All settings will revert to the factory settings.

• Press the œœ √√ buttons simultaneously for more than 5 seconds

with no disc in the unit. All settings including the password will
revert to the factory settings. Don't use this unless absolutely
necessary.

• Go to the contents and find the section of the instruction book that

contains the explanations regarding the current problem, and
follow the procedure once again.

• If the problem still cannot be solved, please contact your nearest

authorised service center.

• Make sure that the disc is not dirty or scratched.

• Clean the disc.

Action

Problem

Page

The picture is
noisy or distorted

-

P60~62

Identifying VCR Problems

No power

You cannot insert
a video cassette

The television
program was not
recorded

Timer recording
was unsuccessful

No playback picture
or the picture

is

distorted

You cannot see
normal broadcasts

Noise bars or
streaks on playback

When the √II button

is pressed during
playback, the still
picture has severe
“noise bars” streaks

Video Head
Cleaning

• Check that the power plug is connected to a wall outlet.

A video cassette can only be inserted with the window

side up and the safety tab facing you.

Check the DVD-VCR antenna/cable connections.

Is the DVD-VCR tuner properly set?

Check if the safety tab is intact on the cassette.

Re-check the recording start/stop time settings.

If there was a power failure or interruption during timer
recording, the recording will have been cancelled.

Check to see if you are using a prerecorded tape.

Check the tuner or external setting. It should be on tuner.

Check the TV or VCR antenna connections.

Press the TRK buttons to minimize this effect.

A still picture may have “noise bars”, depending on the
condition of the tape. Press the TRK buttons during slow
motion to minimize this effect.

If poor pictures appear on a variety of cassettes, the video
heads may need cleaning. This is not a common problem
and unless it appears, the heads should not be cleaned.
When cleaning the video heads, read all instructions
provided with the head cleaning cassette. Incorrect head
cleaning can permanently damage the video heads.

Action

Problem

Page

-

P63

-

P79~80

P75

-

P66

-

-

Advertising
This manual is related to the following products: