Samsung SECR300ZRAMTR - Manual (Page 21)

Call Functions 21
If the recognized name has multiple numbers stored for
it (that is, Home, Work, Mobile, and so on), Voice Dial
displays the possible choices and prompts you with
“Which number?”
5. Say one of the following number types:
• “Home”
• “Work”
• “Mobile”
Voice Dial dials the specified number.
Dialing a Number
To dial a number using Voice Dial, do the following:
1. In standby mode, press and hold .
“Say a Command” appears in the display and is
pronounced through the speaker.
2. Say “Call”.
VoiceSignal prompts you to “Say the name or number.”
3. Speak clearly and say the telephone number of the
person you want to call.
Example: Say “7 8 1 9 7 0 5 2 0 0".
If it recognizes the number, Voice Dial repeats it and
dials the number. If Voice Dial is not sure it has
recognized the number, it displays a choice list of up to
three numbers and prompts you with “Did you say?”
followed by the first number on the list.
4. Say “Yes” to confirm the number or “No” to hear the
next one, or use the keypad to select the correct number
from the list. (For more information, refer to “Choice
Lists” on page 60.)
• Press the Repeat soft key to say the name again.
• Press the Settings soft key, then press the Exit soft key to exit
VoiceSignal without dialing.
Pause Dialing From a Contacts Entry
If you voice dial a contact that contains 2-Sec Pause(s) simply
wait for the pauses to pass and the dialing to complete.
If you voice dial a contact that contains Wait(s), wait for the
appropriate prompt(s) from the number you are calling (credit
card number, bank account number, and so on) and enter the
appropriate response(s).