Samsung RF266ACPN-XAA - Manual (Page 21)

Operating _1
using tHE CoLD wAtER DisPEnsER
ContRoLLing tHE tEMPERAtuRE
02
o
PERA
ting
using the water dispenser (RF266AB)
Place a glass underneath the water outlet and push gently
against the water dispenser lever with your glass. Make sure
the glass is in line with the dispenser to prevent the water from
splashing out.
If you have just installed the Refrigerator or just installed a new
water filter, pour out the first six glassfuls of water to flush out
impurities in the water supply system. Make sure water flows
cleanly before drinking.
Controlling the Freezer temperature
The Freezer temperature can be set between 8°F and -14°F to suit your particular needs. Press the
Freezer button repeatedly until the desired temperature is shown in the temperature display. Keep in
mind that foods like ice cream may melt at 4°F.
The temperature display will move sequentially from -14°F to 8°F. When the display reaches 8°F, it will
begin again at -14°F.
Five seconds after the new temperature is set, the display will again show the actual current freezer
temperature until the new temperature is reached.
Controlling the Refrigerator temperature
The Refrigerator temperature can be set between 46°F and 34°F to suit your particular needs. Press
the Fridge button repeatedly until the desired temperature is shown in the temperature display.
The temperature control process for the Fridge works just like the Freezer process.
Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will begin
adjusting towards the newly set temperature. This will be reflected in the digital display.
The temperature of the Freezer or the Refrigerator may rise from opening the doors too frequently, or if a
large amount of warm or hot food is placed in either side.
This may cause the digital display to blink. Once the Freezer and Refrigerator temperature return to their
normal set temperatures, the blinking will stop.
If the blinking continues, you may need to “reset” the Refrigerator. Try unplugging the appliance, wait for
around 10 minutes and then plug the power cord back in.
If you have a long vacation or business trip, close the water
valve and shut off the water supply to the Refrigerator. This will help prevent accidental leakages.
The water tank’s capacity is approximately one third (1/3) of a gallon.
Please wait 1 second before removing the cup after dispensing water to prevent spills.
CAution
PUSH
/NE H ATER