Removing the freezer accessories, Tilting pocket, Auto pull out drawer – Samsung RF266ACPN-XAA User Manual

Page 27: Freezer drawer bin

Advertising
background image

Operating

_

02
o

PERA

ting

1. tilting Pocket

To remove - Pull the brackets(

1

) upward until you hear a

clicking sound and remove the pocket

To replace - Hook the ends of the pocket into both brackets

(

1

) and push down until it locks into place.

2. Auto Pull out Drawer

To remove - Pull the drawer out to full extension.

Tilt up rear of drawer and lift straight out.

To relocate - Place the drawer onto the rails by tilting it up.

Lower the drawer into place until it is horizontal
and slide the drawer in.

3. Freezer Drawer Bin

To remove the drawer - Pull the drawer out fully.

Tilt up the rear of the bin and lift it

out to remove.

To replace the drawer - Place the bin into the rail assembly.

To remove the divider - Pull the divider straight up.

To replace the divider - Hook the top corners of divider over

the hole of the bin.

REMoVing tHE FREEzER ACCEssoRiEs

1

1



Advertising
This manual is related to the following products: