Samsung EC-WB50FZBPBUS - Manual (Page 97)

Wireless network 96
1
On the camera’s Home screen, scroll to <Wi-Fi>.
2
On the camera, select .
• If the pop-up message that prompts you to download the application
appears, select Next.
3
On the smart phone, turn on Samsung SMART CAMERA App.
• For iOS devices, turn on the Wi-Fi feature before turning on the application.
• To start the application automatically on an NFC-enabled smart phone, turn
on the function and place the smart phone near the NFC tag (p. 15) on the
camera.
4
Select the camera from the list and connect the smart phone to the
camera.
• The smart phone can connect to only one camera at a time.
5
On the camera, allow the smart phone to connect to your camera.
• If the smart phone has been connected to your camera before, it is connected
automatically.
6 On the smart phone, set the following shooting options.
• While using this feature, some buttons are not available on your camera.
• With the smart phone, you can operate the camera only by touching the
screen.
• Remote Viewfinder mode supports the 10M and 3M photo sizes only.
Using a smart phone as a remote shutter release
The camera connects to a smart phone via a WLAN. Use the smart phone as a remote shutter release with the Remote Viewfinder feature. The captured photo will display on the
smart phone.
• The Remote Viewfinder feature is supported by smart phones or tablets running Android OS or iOS. Some features may not be supported by some models. Before using this feature,
update the device’s firmware to the latest version. If the firmware version is not the most recent, this function may not perform properly.
• You should install Samsung SMART CAMERA App on your phone or device before using this feature. You can download the application from Samsung Apps, the Google Play Store, or
the Apple App Store. Samsung SMART CAMERA App is compatible with Samsung camera models manufactured in 2013 or later.