Samsung XE500C21-A04US - Manual (Page 4)

4
Start Using 3G Service
1. Turn on the device.
2. Click the empty Signal Bar which is located on upper right hand corner. (
)
3. Click signal bar by which the operator name is indicated.
4. Check to see if white signal bar is filled in the empty signal bar.
5. Browse internet.
If you cannot connect to 3G network
1. See if SIM is inserted correctly.
2. Check if SIM is activated.
i. Click “Network settings...” which is located on the bottom of the list when you click this
signal bar ( ).
ii. Move the cursor on the operator signal.
iii. Click “Options”.
iv. Check “Connection” tab if the Activation status is “Activated”.