Record speed, Record source, One-touch recording (otr) – Samsung DVD-V1000V-XAA User Manual

Page 28

Advertising
background image

GB

55

GB

54

You can set the DVD-VCR to record from a variety of sources,
including the Tuner, DVD deck, Line 1 (front) input, or Line 2
(rear) input. The Auto setting will record whatever is currently
visible on-screen, as set by the TV VIEW button.

1

Open the “SETUP MENU”

Press the SETUP button on the remote control. The “Setup Menu”
appears.

2

Select “VCR & Channel Setup”

Using the up/down, move the selection arrow to “VCR & Channel
Setup,” then push right to select.

3

Set “Record Source”

Move the selection arrow to “Record Source,” then push right to
select from the following options. The VCR will record from:

• Auto – Whatever is currently visible on screen.
• Tuner – The VCR’s built-in television tuner.
• Line 1 – An external source, such as a camcorder, connected to

the front line inputs.

• Line 2 – An external source, such as a Satellite receiver,

connected to the rear line inputs.

• DVD – A DVD playing in the DVD deck.

Record Speed

You can slow down the recording speed from SP to SLP in order to
fit six hours of programming on a T-120 tape.

1

Start Recording

Follow the Basic Recording instructions on page 52.

2

Set Record Speed

Press the SP/SLP button on the remote control to set the Record
Speed to one of the following options:

• SP – Standard Play, for best quality.
• SLP – Super Long Play, for maximum recording time (3 times

SP).

NOTE: The selected Record Speed will appear on the front panel
display.

Maximum Recording Time - SP vs. SLP

Tape Length SP (Standard Play) SLP (Super Long Play)

T-120

2 hrs

6 hrs

T-160

2hrs 40 mins

8 hrs

T-180

3 hrs

9 hrs

SETUP
/ENTER

TITLE SUBTITLE AUDIO MARK

SP/SLP SET TIMER RETURN SEARCH/INDEX

2

Record Source

REC

DISC MENU

SETUP
/ENTER

TITLE SUBTITLE AUDIO MARK

SP/SLP SET TIMER RETURN SEARCH/INDEX

1

One-Touch Recording (OTR) allows you to add recording time in
30-minute increments up to 9:30 minutes at the touch of a button.

1

Start Recording

Follow the instructions on page 52 to begin recording.

2

Activate OTR

While in Record mode, press the REC button again to activate
One-Touch Recording (OTR).

• OTR 0:30 appears on the On-Screen Display and the DVD-VCR

will record for exactly 30 minutes.

3

Add Recording Time

Continue pressing REC to add recording time in 30 minute
increments up to 9 hours and 30 minutes.

4

Activate Loop Record

When you reach OTR 9:30, press REC again to enter Loop
Record mode. The DVD-VCR will record the entire videotape over
and over in a continuous loop until you press STOP. This can be
used for continuous recording of security cameras.

• If you press Power during OTR, the DVD-VCR will turn off

automatically when the recording time has elapsed.

• The DVD-VCR stops recording automatically when the time has

elapsed.

One-Touch Recording (OTR)

OTR 0:30
0:11:40

SP

OTR Loop
0:11:40

SP

0:11:40

SP

OTR 0:30
0:11:40

SP

OTR 0:30
OTR 1:00
OTR 1:30
OTR 2:00

OTR 9:00
OTR 9:30

01547A DVD-V1000/XAA-Eng4 5/16/02 3:41 PM Page 54

Advertising
This manual is related to the following products: