Samsung HT-FM45-ZA - Manual (Page 16)

| 16
English
Settings
" Select
Initial Settings I Network - Wired
 MAC Address (d0:66:7b:dc:28:fc)
 IP Address, Subnet Mask, Gateway, DNS Server
 Gateway Ping
 Internet Service Test
Your network is operating properly.
 If you still have a network problem, contact your network service provider.
OK
| NOTES |
\ If you want to display the Initial Setting screen again
and make changes, select the Reset option. (See
page 19)
\ If you use an HDMI cable to connect the product to
an Anynet+ (HDMI-CEC)-compliant Samsung TV and
1.) You have set the Anynet+ (HDMI-CEC) feature to
ON in both the TV and the product and 2.) You have
set the TV to a language supported by the product,
the product will select that language as the preferred
language automatically.
The Home Screen
5
4
6
2
1 3
Videos
App 1 App 2 App 3 App 4
Photos Music Settings
No Disc a Change Device d View Devices " Enter
1 Selects Photos.
2 Selects Videos.
3 Selects Music.
4 Selects Settings.
5 Selects applications.
6
Displays the buttons you can use on the
remote to access functions.
1. To select an option on the Home screen, move the
cursor using the ▲▼◄► buttons until it highlights
the option of your choice, and then press the E
button.
| NOTES |
\ To play or view video, photo, music files located on
your PC, you must connect your home theater and PC
to a home network and you must download, install,
and configure the DLNA software on your PC. (See
page 21.)
Accessing the Settings Screen
1. Select Settings on the Home screen, and then
press the E button. The Settings screen appears.
E
Settings
Display 3D Settings
Audio TV Aspect Ratio : 16:9 Original
Network BD Wise : Off
System Resolution : Auto
Language Movie Frame (24 Fs) : Off
Security HDMI Color Format : Auto ►
General HDMI Deep Color : Off
Support Progressive Mode : Auto
2. To access the menus, sub-menus, and options
on the Settings screen, please refer to the remote
control illustration below.
| NOTES |
\ If you leave the product in the stop mode for more
than 5 minutes without using it, a screen saver will
appears on your TV. If the product is left in the screen
saver mode for more than 20 minutes, the power
automatically turns off.
Buttons on the Remote Control Used
for the Settings Menu
TOOLS
RETURN EXIT
INFO
SUBTITLE HOME REPEAT
TUNER
2 4
3
1
1
HOME Button : Press to move to the Home
screen.
HT-FM45_ZA_0530.indd 16 HT-FM45_ZA_0530.indd 16 2013-05-30 오후 3:23:43 2013-05-30 오후 3:23:43