Appendix, Additional information – Samsung HT-FM45-ZA User Manual

Page 31

Advertising
background image

English

31

|

07

Appendix

Additional Information

Notes

Connections

HDMI OUT

• Certain HDMI output resolutions may not work,

depending on your TV.

• You must have an HDMI connection to enjoy videos

with 3D technology.

• A long HDMI cable may cause screen noise. If this

occurs, set HDMI Deep Color to Off in the menu.

Settings

3D Settings

• For some 3D discs, to stop a movie during 3D

playback, press the 5 button once. The movie
stops and the 3D mode option is de-activated.
To change a 3D option selection when you are
playing a 3D movie, press the 5 button once.
The Blu-ray menu appears. Press the 5 button
again, then select 3D Settings in the Blu-ray menu.

• Depending on the content and the position of the

picture on your TV screen, you may see vertical black
bars on the left side, right side, or both sides.

TV Aspect Ratio

• Depending on the disc type, some aspect ratios may

not be available.

• If you select an aspect ratio and option which is

different than the aspect ratio of your TV screen, the
picture might appear to be distorted.

• If you select the 16:9 Original, your TV may display

4:3 Pillarbox (black bars on sides of picture).

BD Wise (Samsung Products only)

• When BD Wise is on, the Resolution setting

automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.

• If the product is connected to a device that does

not support BD Wise, you can not use the BD Wise
function.

• For proper operation of BD Wise, set the BD Wise

option in both the product and the TV to On.

Digital Output

• Be sure to select the correct Digital Output or you will

hear no sound or just loud noise.

• If the HDMI device (AV receiver, TV) is not compatible

with compressed formats (Dolby Digital, DTS), the
audio signal outputs as PCM.

• Regular DVDs do not have BONUSVIEW audio and

Navigation Sound Effects.

• Some Blu-ray Discs do not have BONUSVIEW audio

and Navigation Sound Effects.

• This Digital Output setup does not affect the analog

(L/R) audio or HDMI audio output to your TV.
It affects the optical and HDMI audio output when
your product is connected to an AV receiver.

• If you play MPEG audio soundtracks, the audio signal

outputs as PCM regardless of your Digital Output
selections (PCM or Bitstream).

• Digital Output can be activated when Speaker

Selection is set to TV Speaker.

BD-Live Internet Connection

• The Internet connection may be restricted while you

are using BD-LIVE contents.

Anynet+ (HDMI-CEC)

• Depending on your TV, certain HDMI output

resolutions may not work. Please refer to the user
manual of your TV.

• This function is not available if the HDMI cable does

not support CEC.

• If your Samsung TV has an Anynet+ logo, then it

supports the Anynet+ function.

BD Data Management

• In the external memory mode, disc playback may

be stopped if you disconnect the USB device in the
middle of playback.

• Only those USB devices formatted in the FAT file

system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that support
the USB 2.0 protocol with 4 MB/sec or faster read/
write speeds.

• The Resume Play function may not work after you

format the storage device.

• The total memory available to BD Data Management

may differ, depending on conditions.

Speaker Settings

• When Speaker Selection is set to TV Speaker,

audio is produced through the TV speakers.

HDMI audio

• When HDMI audio is outputted to the TV speaker, it

is automatically down-mixed to 2 channels.

Appendix

HT-FM45_ZA_0530.indd 31

HT-FM45_ZA_0530.indd 31

2013-05-30 오후 3:24:09

2013-05-30 오후 3:24:09

Advertising