Samsung HT-DM150 - Manual (Page 21)

SETUP
Listening on headphones
DSP
(Digital Signal Processor)
Modes Listening on headphones
39 40
Use headphones (not supplied) for private listening pleasure.
Connect the headphones to the HEADPHONES jack of the front panel.
• No sound is produced from the speakers.
• To prevent hearing damage, do not raise the volume level excessively when using
headphones.
HEADPHONE jack
DSP modes have been designed to simulate different acoustic environments.
The sound heard in a hall, theater, pavilion, dance club, or live club consists of direct
and indirect sound —early reflections and reflections from behind.
Direct sounds reach the listener directly without any reflection.
Indirect sounds are delayed by the distance of the ceiling and walls.
These indirect sounds are an important element of the acoustic surround effect.
• The following DSP modes are provided with this unit:
• These DSP modes can be used to add acoustic surround effects while reproducing
stereo analog or linear PCM digital signals.
• When one of the DSP modes is selected,the DSP indicator lights up on the display.
Press the DSP /DPL II Mode button.
DSP modes available according to the input signal format
O : Possible, X : Not possible
Provides a clear vocal and simulates the feeling of a concert hall. HALL
Simulates the feeling of a theater. THEATER
Simulates the spacious feeling of a pavilion with a high ceiling. PAVILION
Simulates the sound of a dance club with a throbbing bass beat. DANCE CLUB
Simulates the feeling of a live music club with a low ceiling.
➠➠
➠
➠
➠
LIVE CLUB
• This function works only in the STEREO Mode.
Press the Effect button.
• The following Effect mode is provided with this unit when the DSP mode is selected.
EFFECT 1 EFFECT 2 EFFECT 3 ➠ ➠ ➠ ➠ DEFAULT