Samsung SPH-M580ZKASPR - Manual (Page 166)

152 3B. Web and Data Services
Wi-Fi communication requires access to an existing
and accessible Wireless Access Point (WAP). These
WAPs can either be Open (unsecured) as within most
Hot Spots, or Secured (requiring knowledge of the
Router name and password).
The Samsung Replenish™ is capable of
communication with devices using 802.11n speeds
(802.11n connections should support data rates of over
100 Mbps). 802.11n also offers better communication
ranges over earlier Wi-Fi standards due to increased
signal intensity. The Samsung Replenish™ is
backwards compatible with previous WAP
technologies (802.11b and 802.11g).
Turning Wi-Fi On and Off
By default, your device’s Wi-Fi feature is turned off.
Turning Wi-Fi on makes your device able to discover
and connect to compatible in-range WAPs.
Turn Wi-Fi on:
1. Press > > >
Wireless & networks > Wi-Fi settings.
2. Tap the Wi-Fi field to activate the feature (green
checkmark indicates active). The device scans for
available in-range wireless networks.
To turn Wi-Fi off:
1. Press > > >
Wireless & networks > Wi-Fi settings > Wi-Fi .
2. Tap to remove the green checkmark and
deactivate Wi-Fi.
To connect to a Wi-Fi network:
1. Press > > >
Wireless & networks > Wi-Fi settings.
Ⅲ The network names and security settings (Open
network or Secured with xxx) of detected Wi-Fi
networks are displayed in the Wi-Fi networks
section.
Note: Use of wireless data connections such as Wi-Fi and
Bluetooth can cause an added drain to your battery
and reduce your use times.
Note: When you select an open network, you will be
automatically connected to the network.
SPH-M580.book Page 152 Thursday, January 12, 2012 2:53 PM