Samsung SCH-I770HAAVZW - Manual (Page 95)

Changing Your Settings 92
Connections
3. Tap the Connections tab.
4. Tap Bluetooth .
5. Prepare your external Bluetooth device for communication and detection.
6. Tap the Devices tab and select Add new device from the on screen list.
Your phone will then display a list of discovered Bluetooth devices which
have been detected within its communication range.
7. Tap/select the device you wish to pair with and tap the Next button.
8. Enter the numeric passcode and press the Next button. You are then
notified the pairing is in progress.
9. Use either your virtual QWERTY keyboard or keypad to enter a new Device
Name for the external Bluetooth device and tap the desired services
available to that same device.
10. Tap the Done button to complete the process.
11. Tap to save your changes and return to the previous screen.
Note: Smart pairing mode allows you to easily make a connection with your hands-free or stereo headset.
Beam
A Beam connection can be established by:
1. From the Today screen, tap Start located in the upper left corner of
the screen.
2. Tap Settings . By default, the Personal tab is highlighted.
3. Tap the Connections tab.
4. Tap Beam to open the Beam screen.
5. Tap the box to place a check mark to receive all incoming beams, if
desired.
6. Tap to save your changes and return to the previous screen.
Connections
1. From the Today screen, tap Start located in the upper left corner of
the screen.
2. Tap Settings . By default, the Personal tab is highlighted.
3. Tap the Connections tab.
4. Tap Connections .
5. Make any changes, if necessary, in the Tasks or Advanced tabs.
ok
ok