Samsung HPT4264X-XAA - Manual (Page 14)

English - 14
Connecting an Amplifier/DVD Home Theater
1 Connect Audio Cables
between the AUDIO OUT
[R-AUDIO-L] on the TV and
AUDIO IN [L-AUDIO-R] on
the Amplifier/DVD Home
Theater.
When an audio amplifier is
connected to the “AUDIO
OUT [R-AUDIO-L]” terminals:
Decrease the gain (volume)
of the TV, and adjust the
volume level with the
Amplifier’s volume control.
➢ Each Amplifier/DVD Home Theater has a different back panel configuration.
➢ When connecting an Amplifier/DVD Home Theater, match the color of the
connection terminal to the cable.
Amplifier/DVD Home Theater
TV Rear Panel
Audio Cable (Not supplied)
Connecting a PC
Using the D-Sub Cable
1 Connect a D-Sub Cable
between PC IN [PC] jack on
the TV and the PC output
jack on your computer.
2 Connect a PC Audio Cable
between PC IN [AUDIO] jack
on the TV and the Audio Out
jack of the sound card on
your computer.
Using the HDMI/DVI Cable
1 Connect a HDMI/DVI cable
between the [HDMI IN 1] jack
on the TV and the PC output
jack on your computer.
2 Connect a 1Stereo/2RCA
cable between the DVI IN
(HDMI 1) [R-AUDIO-L] jack
on the TV and the Audio Out
jack of the sound card on
your computer.
➢ Each PC has a different back panel configuration.
➢ When connecting a PC, match the color of the connection terminal to the cable.
➢ When using an HDMI/DVI cable connection, you must use the HDMI IN1 terminal.
PC
TV Rear Panel
PC Audio Cable (Not supplied) 2
D-Sub Cable (Not supplied) 1
Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
1 Connect an Optical Cable
between the DIGITAL AUDIO
OUT (OPTICAL) jacks on
the TV and the Digital Audio
Input (OPTICAL) jacks on the
Digital Audio System.
When a Digital Audio System
is connected to the “DIGITAL
AUDIO OUT (OPTICAL)”
terminal:
Decrease the gain (volume)
of the TV, and adjust the
volume level with the
system’s volume control.
What is OPTICAL?
• Converts the electric signal into an optical light signal, and transmits it through glass
fibers. S/PDIF is a transmission system of digital audio in the form of a light wave
that uses a glass conductor.
➢ 5.1CH audio is possible when the TV is connected to an external device
supporting 5.1CH.
➢ Each external input source device has a different back panel configuration.
➢ If you have an external device (DVD. Cable/Set-top box) connected via HDMI to
the TV, audio is not output from the Optical jack.
Digital Audio System
TV Rear Panel
Optical Cable (Not supplied)
Using the D-Sub Cable
Using the HDMI/DVI Cable TV Rear Panel
PC
3.5 mm Stereo plug to 2 RCA Cable (Not supplied) 2
HDMI/DVI Cable (Not supplied) 1
BN68-01131N-02Eng-1.indd 14 2007-03-05 ｿﾀﾀ・10:21:51