Samsung HPT4264X-XAA - Manual (Page 15)

English - 15
Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
➢ It may take a while when your TV starts.
Plug & Play Feature
When the TV is initially powered On, basic settings proceed automatically and subsequently:
1 Press the POWER button on the remote control.
The message Menu language, Shop Mode, Channels and Time will be set. is
displayed.
2 Press the ENTER button to enter the language.
Press the ▲ or ▼ button to select language, then press the ENTER button.
The message Select Home Mode when installing this TV at home. is
automatically displayed.
3 Press the ◄ or ► button to select Shop or Home, then press the ENTER
button.
➢ The default selection is Home.
➢ We recommend setting the TV to Home mode for the best picture in your
home environment.
➢ Shop mode is only intended for use in retail environments.
➢ If the unit is accidentally set to Shop mode and you want to return to
Dynamic (Home) mode, press the Volume button and then hold down the
MENU button for five seconds on the TV panel.
4 Press the ▲ or ▼ button to memorize the channels of the selected connection.
Press the ENTER button to select Start.
➢ If the antenna is connected to ANT1 IN(AIR), select Air and if it is connected
to ANT 2 IN(CABLE), select Cable.
➢ If both ANT 1 IN(AIR) and ANT 2 IN(CABLE) are connected,
select the Air + Cable.
➢ In Cable mode, select the correct analog signal cable system source from
among STD, HRC, and IRC by pressing the ▲ or ▼ button, then press the
ENTER button. If you have Digital cable TV, select the cable system signal
source for both Analog and Digital. Contact your local cable company to
identify the type of cable system that exists in your particular area.
To memorize the channels, press the ► button to select Start, then press
the ENTER button.
Contact your local cable company to identify the type of cable system that
exists in your particular area.
Continued...
Menu language, Shop Mode,
Channels and Time will be set.
i
Start
Select Home Mode when installing this TV at home.
Plug & Play
Enter Skip
Shop Home
Move
Select the language of the OSD.
Menu Language :
Plug & Play
English
Spanish
French
Enter Skip Move
Select the antennas to memorize.
Air
Cable
Air + Cable
Plug & Play
Start
Start
Start
Enter Skip Move
Plug & Play
Enter Skip Move
Select the cable system.
STD
HRC
IRC
Analog
STD
HRC
IRC
Digital
Start
BN68-01131N-02Eng-1.indd 15 2007-02-27 ш¿¿¸ 11:13:08