Samsung HPT4264X-XAA - Manual (Page 56)

English - 56
Using the V-Chip
The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must
enter a PIN (personal ID number) before any of the V-Chip restrictions are set up or changed.
➢ When the V-Chip feature is activated, the PIP features do not function.
➢ The V-Chip does not work if the input is Digital TV (HD or SD).
➢ V-Chip function is not available in HDMI or component mode.
Setting Up Your Personal ID Number (PIN)
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
2 Press the ▲ or ▼ button to select V-Chip, then press the ENTER button.
The message Enter PIN will appear. Enter your 4 digit PIN number.
➢ The default PIN number of a new TV set is 0-0-0-0.
Continued...
Plug & Play ►
Language : English ►
Time ►
Game Mode : Off ►
V-Chip ►
Caption ►
Menu Transparency : Medium ►
▼ More
Setup T V
Enter Move
V-Chip T V
0~9 Enter PIN
Enter PIN
* * * *
Return
Return
Upgrading the Software
Samsung may offer upgrades for your TV’s firmware in the future. Please contact the Samsung call center at
1-800-SAMSUNG to receive information about downloading upgrades and using a USB drive. Upgrades will be
possible by connecting a USB drive to the USB port located on the side of your TV.
1 Insert a USB drive containing the firmware upgrade into the USB Upgrade Port
on the side of the TV.
2 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
3 Press the ▲ or ▼ button to select SW Upgrade, then press the ENTER button.
4 Press the ▲ or ▼ button to select USB, then press the ENTER button.
The message Scanning for USB... It may take up to 30 seconds. is displayed.
5 If the firmware on the USB is properly recognized, the message Upgrade
version xxxx to version xxxx? The system would be reset after upgrade. is
displayed.
Press the ◄ or ► button to select OK, then press the ENTER button.
The upgrade starts.
Please be careful to not disconnect the power or remove the USB drive while
upgrades are being applied.
The TV will shut off and turn on automatically after completing the firmware
upgrade.
Please check the firmware version after the upgrades are complete.
➢ The firmware and upgrade process may be different by country and region.
USB ►
SW Upgrade T V
Enter Return
▲ More
Screen Burn Protection ►
HDMI Black Level : Normal ►
Film Mode : Off ►
Wall-Mount Adjustment ►
PIP ►
Function Help : On ►
SW Upgrade ►
Setup T V
Enter Move Return
SW Upgrade
Scanning for USB...
It may take up to 30 seconds.
Move
���������
SW Upgrade
Upgrade version XXXX to version XXXX ?
The system would be reset after upgrade.
OK Cancel
BN68-01131N-02Eng-1.indd 56 2007-02-27 ш¿¿¸ 11:14:18