Samsung SCH-R630LBAUSC - Manual (Page 102)

99
2. Tap the desired NAM setting. The phone powers itself off
and back on.
PC Connection
PC Connection lets you select the default type of PC connection
you wish to use to exchange files between a PC and your r630.
Tip: For more information on using PC Connection, contact your service
provider.
1. At the Phone Settings sub-menu, tap PC Connection.
The following options appear in the display:
• USB — Automatically activates when you connect your phone to a
PC with an optional USB Data Cable. Lets you access your phone’s
memory and any optional microSD Memory Card, if installed, from
your PC. (For more information, refer to “Install a Memory
Card” on page 8.)
• Bluetooth — Lets you automatically transfer files, such as
Contacts information, from your phone to a PC over a Bluetooth
connection. This option requires that you pair (register) your PC and
your r630. (For more information, refer to “Add New Device” on
page 82.)
• No Connection — This option blocks your r630 from connecting
with a PC.
2. Tap the preferred PC Connection type.
Call Settings
You can use Call Settings to select how your phone handles calls,
both voice and data calls.
ᮣ From the Settings menu, tap Call Settings. The following
sections describe the call sub-menus in detail.
Answer Options
You can select a specific answer mode when you receive an
incoming call. (For more information, refer to “Call Answer” on
page 25.)
Tip: You can set your phone to answer calls automatically, without any input
from you. (For more information, refer to “Call Answer” on page 25.)
Auto Retry
Auto Retry automatically re-dials a number if the connection fails.
Depending upon your location, the number of times your phone
automatically dials the number may vary.
1. From the Call Settings menu, tap Auto Retry. The following
options appear in the display:
• Every 10 Seconds — Phone automatically re-dials a number
every 10 seconds.
• Every 30 Seconds — Phone automatically re-dials a number
every 30 seconds.