Samsung SCH-R630LBAUSC - Manual (Page 26)

23
Voice Commands
The voice recognition capabilities of your R630 are exceptional
due to advanced, speaker-independent technology. This means
you do not need to “train” your phone to understand your voice.
You can use your voice in a natural manner to dial numbers.
Note: End Calls Before relaunching the Voice Service voice recognition
software — When you use Voice Commands to make a call, you must
end that call before you can use other Voice Commands. (For more
information, refer to “Voice Service” on page 78.)
Use the Call command to dial any number stored in your
Contacts list by saying the name of the contact (Name Dialing).
You can also use Call to dial any telephone number, even
numbers not stored in your contact list, by speaking the
individual digits in the number (Digit Dialing).
Voice Dialing Tips:
• Wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking to someone
on the phone.
• When saying a name, say the first name then the last name.
Dialing a Name
To dial a name, do the following:
1. In Standby mode, tap Menu ➔ Menu 2 ➔ Voice
Commands.
Tip: You can select Voice Commands as one of your Shortcuts. (For more
information, refer to “Shortcut Screen” on page 14.)
“Please say a command” is pronounced through the
speaker.
2. Say, “Call”.
You are prompted to “Say the name or number of the
person you would like to call, or say voicemail or last
number”.
3. Speak clearly and say the name of a person in your
Contacts list, first name followed by last name.
If the name is recognized, Voice Commands repeats the
name and dials the number.
If Voice Commands is not sure which name you said, it
displays a choice list of up to three names and prompts
you with “Did you say?” followed by the first name on the
list.
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
the list. (For more information, refer to “Voice Service” on
page 78.)
• Press to exit Voice Service without dialing.