Samsung SCH-R630LBAUSC - Manual (Page 27)

Call Functions 24
If the recognized name has multiple numbers stored for it
(that is, Mobile 1, Mobile 2, Home, and so on), Voice
Commands displays the possible choices and prompts you
with “Which location?”
5. Say or tap one of the following number types:
• “Mobile 1”
• “Mobile 2”
• “Home”
• “Fax”
Voice Commands dials the specified number.
Dialing a Number
To dial a number using Voice Commands, do the following:
1. In Standby mode, tap Menu ➔ Menu 2 ➔ Voice
Commands.
Tip: You can select Voice Commands as one of your Shortcuts. (For more
information, refer to “Shortcut Screen” on page 14.)
“Please say a command” is pronounced through the
speaker.
2. Say “Call”.
You are prompted to “Say the name or number of the
person you would like to call, or say voicemail or last
number”.
3. Speak clearly and say the telephone number of the person
you want to call.
For example, say “7 8 1 9 7 0 5 2 0 0."
If it recognizes the number, Voice Commands repeats it
and dials the number. If Voice Commands is not sure it has
recognized the number, it displays a choice list of up to
three numbers and prompts you with “Did you say?”
followed by the first number on the list.
4. Say “Yes” to confirm the number or “No” to hear the next
one, or use the keypad to select the correct number from
the list. (For more information, refer to “Voice Service” on
page 78.)
• Tap Repeat to say the number again.
• Press to exit Voice Commands without dialing.
Pause Dialing From a Contacts Entry
• If you voice dial a contact that contains 2-Sec Pause(s) simply wait for
the pauses to pass and the dialing to complete.
• If you voice dial a contact that contains Wait(s), wait for the appropriate
prompt(s) from the number you are calling (credit card number, bank
account number, and so on) and enter the appropriate response(s).
Answering a Call
Incoming
When you receive a call, the phone displays one of the following: