Samsung SCH-R630LBAUSC - Manual (Page 97)

Changing Your Settings 94
2. Open the QWERTY keypad and enter a word or short
phrase (up to 18 characters) to appear in your phone’s
display while in Standby mode. (For more information,
refer to “Entering Text” on page 16.)
3. To save the new banner, tap Save. To discard your
changes, tap
.
Backlight
You can set the backlight for your display or keypad to remain on
or off or to remain on for a specified period of time.
Note: Prolonged backlight use drains your battery faster.
1. From the Display Settings menu, tap Backlight. The
following sub-menus appear in the display:
• Backlight Time — Sets the amount of time the main display
backlight remains on with the phone idle. Optional settings are 10,
15, and 30 Seconds; Always On (this setting uses much more
power than the timed settings); and Always Off.
• Brightness — Slide your finger across the touch screen between
any of 6 optional settings (0 – 5).
2. Tap the desired option to launch its sub-menu and tap
settings as desired.
Wallpaper
Wallpaper lets you choose the pictures that appear in your
phone’s display while in Standby mode.
1. From one of the three Home screens, tap Menu ➔ Settings
➔ Display Settings ➔ Wallpaper. The Pictures screen
appears in the display.
2. To browse the thumbnail images, slide your finger up or
down on the touch screen.
3. Tap the desired picture, then tap Set.
Fonts
Fonts lets you select the size of displayed dialed numbers and
the color for the text on the Lock Screen.
1. From the Display Settings menu, tap Fonts. The following
options appear in the display:
• Dial Font Size — Set dialed numbers to appear in Normal or
Large font size.
• Lock Screen Font Color — Select one of 16 colors.
2. Tap the desired font size and/or color.
Unlock Screen
Unlock Screen lets you select which key(s) can awaken your
phone’s display when locked and the backlight is off.