Samsung SCH-U350ZIAATL - Manual (Page 20)

17
1. Enter the number you wish to call, then press the Options
soft key. The following options appear in the display:
• P Pause — a hard pause (waits for input from you followed by
pressing ).
• T Pause — a four-second pause.
Tip: You can create pauses longer than four seconds by entering multiple T
Pauses.
2. Select the desired pause to enter it into your number
sequence.
3. Press to call the number.
Making a Call — Speed Dialing
You can store phone numbers and contact names in your phone’s
Contacts list. Speed Dialing lets you quickly and easily dial any
contact in your Contacts list by using that contact’s location
number in the list. You can assign and change location (speed
dial) numbers for your contacts. (For more information, refer to
“Assigning Speed Dial Numbers” on page 31.)
One-Touch Dialing
Speed Dial numbers 002 through 009 are special One-Touch
dialing numbers. You can call the phone numbers stored in your
phone’s Contacts list and assigned Speed Dial numbers 002
through 009 by pressing and holding a single key.
Example: For Speed Dial number 003, press and hold until the name
and number appear in the display and the number is dialed.
Two-Touch Dialing
Memory locations 010 through 099 are special Two-Touch
dialing locations.
Example: For Speed Dial number 013, briefly press , then press and hold
until the name and number appear in the display and the
number is dialed.
Three-Touch Dialing
Memory locations 100 through 999 are special Three-Touch
dialing locations.
Example: For Speed Dial number 113, briefly press , briefly press
again, then press and hold until the name and number appear
in the display and the number is dialed.
Pause Dialing From a Contacts Entry
• If you speed dial a contact that contains (four-second) T Pause(s)
simply wait for the pauses to pass and the dialing to complete.
• If you speed dial a contact that contains (hard) P Pauses, wait for the
appropriate prompt(s) from the number you are calling (credit card