Samsung SCH-U350ZIAATL - Manual (Page 25)

Call Functions 22
• Lock / Unlock — Protect the selected data call from being
erased.
• Erase All — Erase all calls from your Outgoing call log.
• Data Counter — Shows the total data Transmitted during the call,
Received during the call, Total data transmitted and received during
the call, the date and time the Data Counters were last reset, and
the Lifetime Data Counter.
4. Select an option to perform its function.
Call Timer
View the duration of your last call, total calls, and calls made
during the life cycle of you phone using the Call Timer feature.
Note: Call Timer is not for billing purposes.
1. In standby mode, press Menu, then select Calls ➔
Call Timer. The following options appear in the display:
• Last Call — View the duration of your last call.
• Outgoing Calls — View the duration of the total outgoing calls
made with your phone while within your Wireless Provider’s
network and since the last reset.
• Incoming Calls — View the duration of the total incoming calls
received by your phone while within your Wireless Provider’s
network and since the last reset.
• Roaming Calls — View the total calls duration on your phone
while roaming since the last reset.
• All Calls — View the duration of the total call, incoming, outgoing,
and data calls made with or recieved by your phone since the last
reset.
• Last Reset — View the time and date all timers were last reset.
• Lifetime Calls — View the duration of all calls since your phone
was activated.
Note: Although Total call timers can be reset to 0, the Lifetime Calls timer
can never be reset.
2. To reset a single counter (except Last Reset and Lifetime
Calls), highlight it and press the Reset soft key.
3. To reset all counters except Lifetime Calls, press the Reset
All soft key.
Data Counter
View the amount of Transmit data, Receive data, and Total data
transmitted or received since the last time you reset the data
counters, and the Lifetime amount of data transmitted or
received.
Note: Data Counter is not for billing purposes.
1. In standby mode, press Menu ➔ Calls ➔ Data Counter.