Making minor adjustments between doors, Adjusting the freezer drawer level – Samsung RF4289HARS-XAA User Manual

Page 10

Advertising
background image

10_

setting up

If the right side is lower, perform the same
procedure, but with the right control lever.

It is difficult to remove the cover leg front from
the refrigerator, so we do not recommend
making small adjustments wIth the control lever.
Instead, refer to the next page for the best way
to make minor adjustments to the doors.

MAkING MINOR ADjuSTMENTS
BETWEEN DOORS

Remember, a leveled refrigerator is necessary for
getting the doors perfectly even. If you need help,
review the previous section on leveling the refrigerator.

The left door is fixed. To make minor
adjustments between doors, adjust only the
right door.

1. Pull out the Flex Zone door ( 1 ) to expose the

lower hinge (

2 ).

2. Insert the supplied allen wrench (3/16”) ( 3 ) into

the shaft (

4 ) of the lower hinge.

3. Please adjust the height by turning the hex wrench

(

3 ) clockwise (

DOWN

) or counter-clockwise (

uP

).

When you turn the hex wrench counter-
clockwise (

), the door will move up.

1. After adjusting the doors, please insert the

supplied fastener (

6 ) using a pliers ( 5 ) in the gap

between the hinge-grommet (

7 ) and the lower

hinge (

8 ). The number of fastener you’ll need to

insert depends on the gap.

2 fastener are enclosed with the refrigerator.
The thickness of each fastener is 0.04”.

ADjuSTING THE FREEzER DRAWER
LEVEL

1. Locate the height-adjuster ( 1 ) in the freezer

drawer. Unscrew the 8 Phillips screws (

2 ) slightly

to loosen the door.

2. Loosen the controller

screw (

3 ) with a Phillips

screwdriver(+).

3

1

2

3

4

Adjustment
part

Fixed part

Freezer Drawer

Adjustment part

1

2

3

DA68-02520A(0.0)-EN.indd 10

2011.3.2 8:39:28 AM

Advertising