Samsung RF4289HARS-XAA User Manual

Page 80

Advertising
background image

80_

troubleshooting

PROBLEM

SOLUTION

Photos not showing

with the memory card

connected

When the “A SD/MMC card is connected” messages do not show on the screen, check if the

memory type is SD / SDHC / MMC / HS MMC.

Check if there are photos or images stored in the memory card.

Check if the images in the memory card are JPEG (JPG) types.

The LCD screen turns

off frequently.

It is a power-saving function and it is normal.

At the Settings-Display, the Screensaver Running Time can be set.

There is image sticking

or an edge line left on

the screen.

The still screen can make a permanent damage on the LCD. So, when selecting a Screensaver,

select as many themes as possible.

NOTE : Defects caused by this will not be covered by the factory warranty.

The input point of the

touch screen is not

correct.

Run the Touch Screen Calibration function at the Settings.

There is no wireless AP

detected.

Check if the power for the wireless AP is on.

Check if the wireless AP supports IEEE 802.11 b/g.

If the wireless AP is located away from the Fridge, move the wireless AP closer to the Fridge

and check if it is detected.

Turn off and on the power of both the Wireless AP and the Fridge.

It is not able to connect

to the wireless AP.

Check if the wireless AP supports IEEE 802.11 b/g.

Check the status of the internet connection of the wireless AP.

Check if the current cost rate plan of the internet covers the wireless network connection, And,

if so, please check how many connections are allowed.

When the device is processed with the MAC address certification and registration with the new

internet provider, it can not be connected to the wireless network. In this case, please contact
your internet provider and get supports for the wireless network connection with a device
(Fridge) other than the device having the prior certification. (The MAC address of the Fridge
can be found on the bottom of the screen showing the wireless AP after selecting the Settings
- WiFi Networks.)

Turn off and on the power of both the Wireless AP and the Fridge.

Can’t remember the

password for the

wireless AP connection.

Refer to the wireless AP manual and reset the password again.

Functions using the

wireless network (Wi-FI)

do not work.

Functions using the wireless network (Wi-Fi) such as Epicurious, Calendar, WeatherBug, AP

News, Pandora and Twitter can be used only with the households using the wireless network
(Wi-Fi).

If there are any other devices connected to the wireless network, please check the connection

status of the device.

Since it is a service based on the data from the information provider through the internet, the

information updates can be delayed or cut depending on the status of the internet connection.

Turn off and on the power of both the Wireless AP and the Fridge.

Can’t connect to the

external devices being

detected.

When the network of the external device being detected is abnormally shut down (such as

power off, out of the network range, etc), the network information will remain on the network
list by the DLNA specifications. But, its connection is not available.

Select the Photos function - All Share and search the external devices again.

DA68-02520A(0.0)-EN.indd 80

2011.3.2 8:41:42 AM

Advertising