Samsung HT-BD1150T-XAA - Manual (Page 39)

39
ENG
●
AUDIO SETUP
Audio setup
Setting the Test Tone
Use the Test Tone feature to check the speaker connections.
With the unit in Stop mode, press the MENU button.
Press the ▲▼ buttons to select Setup, then press the
ENTER or ► button.
Press the ▲▼ buttons to select Audio Setup, then press
the ENTER or ► button.
Audio setup menu will be displayed.
Press the ▲▼ buttons to select Test Tone, then press the
ENTER or ► button.
Press the RED(A) button
A test tone will be sent to L C R SR SL
LFE in order so you can make sure the speakers are set
up correctly.
To end the test tone, press the RED (A) button again.
Press the RETURN button to return to the previous
menu.
When playing a BD/DVD or CD, this will work only in
Stop mode.
Use this function to check that each speaker is
correctly connected and that there is no problem.
When HDMI AUDIO is on (audio is produced through
TV speakers), the TEST TONE function is not
available.
1.
2.
3.
•
4.
5.
•
6.
M




DVD
Dynamic Compression : On
AV Sync : 50msec
Test Tone ►
Speaker Distance
Sound Edit
System Setup
Language Setup
Audio Setup ◄
Display Setup
HDMI Setup
Network Setup
Parental Setup
Dynamic Compression : On ►
AV Sync : 50msec
Test Tone
Speaker Distance
Sound Edit
System Setup
Language Setup
Audio Setup ◄
Display Setup
HDMI Setup
Network Setup
Parental Setup
DVD DVD
DVD
Dynamic Compression : On
AV Sync : 50msec
Test Tone ►
Speaker Distance
Sound Edit
System Setup
Language Setup
Audio Setup ◄
Display Setup
HDMI Setup
Network Setup
Parental Setup
Front : Present
Subwoofer : Present
Center : Present
Surround : Present
Test Tone
Start Return A
SETTING UP THE SPEAKER OPTIONS
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
On : When Movie soundtracks are played at low volume or
from smaller speakers, the system can apply appropriate
compression to make low-level content more intelligible and
prevent dramatic passages from getting too loud.
Off : You can enjoy the movie with the standard Dynamic
Range.
AV Sync
Video may look slower than the audio when the player is
connected to a digital TV. If this occurs, adjust the audio
delay time to match the video.
You can set the audio delay time between 0 ms and 300
ms. Set it to the optimal status.
•
•
•
Setup Dynamic Compression : On ►
AV Sync : 50msec
Test Tone
Speaker Distance
Sound Edit
System Setup
Language Setup
Audio Setup ◄
Display Setup
HDMI Setup
Network Setup
Parental Setup
DVD DVD On
Off
DVD Setup
Dynamic Compression : On
AV Sync : 50msec
Test Tone
Speaker Distance
Sound Edit
System Setup
Language Setup
Audio Setup ◄
Display Setup
HDMI Setup
Network Setup
Parental Setup
0msec
25msec
50msec
75msec
100msec
125msec
HT-BD1150_XAA_0616-2.indd 39 HT-BD1150_XAA_0616-2.indd 39 2009-06-16 1:34:17 2009-06-16 1:34:17