Upgrading the software, Setting the function help – Samsung HLT6189SAX-XAA User Manual
Page 62
English - 62
Setting the Function Help
Displays help on the menu functions.
1 Press the MENU button.
Press the ▲ or ▼ button to select
Setup, then press the ENTER button.
Press the ▲ or ▼ button to select
Function Help, then press the ENTER button.
2 Press the ▲ or ▼ button to select Off or On, then press the ENTER button.
Press the
EXIT button to exit.
➢
The
Function Help default setting is On.
Upgrading the Software
Samsung may offer upgrades for your TV’s firmware in the future. Please contact the Samsung call center at
1-800-SAMSUNG to receive information about downloading upgrades and using the USB device. Upgrades will be possible
by connecting a USB drive to the USB port located on the back of your TV.
1 Insert a USB drive containing the firmware upgrade into the USB Upgrade Port on the
side of the TV.
2 Press the MENU button.
Press the ▲ or ▼ button to select
Setup, then press the ENTER button.
Press the ▲ or ▼ button to select
SW Upgrade, then press the ENTER button.
The message
Scanning for USB... It may take up to 30 seconds. is displayed.
3 If the firmware on the USB is properly recognized, the message Upgrade version
xxxx to version xxxx? The system would be reset after upgrade. is displayed.
Press the ◄ or ► button to select
OK, then press the ENTER button. The upgrade
starts.
Please be careful not to disconnect the power or remove the USB drive while
upgrades are being applied.
The TV will shut off and turn on automatically after completing the firmware upgrade.
Please check the firmware version after the upgrades are complete.
➢
The firmware and upgrade process may be different by country and region.
Setup
Anynet+ (HDMI-CEC)
Function Help
: On
▶
Setup
Anynet+ (HDMI-CEC)
SW Upgrade
Function Help
: On
▶
Off
On
Setup
Bluetooth
Anynet+ (HDMI-CEC)
SW Upgrade
▶
Function Help
: On
Software Upgrade
Scanning for USB.....
It may take up to 30 seconds.
Software Upgrade
Upgrade version XXXX to version XXXX ? The
system would be reset after upgrade.
OK
Cancel
BP68-00628B-00Eng_3.indd 62
2007-03-02 ｿﾀﾈﾄ 4:23:29