Samsung HLT6189SAX-XAA - Manual (Page 70)

English - 70
WISELINK
Using the WISELINK Function
This function enables you to view and listen to photo (JPEG) and audio files (MP3) saved on a USB Mass Storage Class (MSC)
device.
1 Press the power button on the
remote control or front panel.
2 Connect a USB device containing
JPEG and/or MP3 files to the
WISELINK jack (USB jack) on the
side of the TV.
TV Side Panel
Removing a USB Device
1 Press the MENU button.
Press the ▲ or ▼ button to select Guide, then press the ENTER button.
2 Press the ENTER button to select WISELINK.
The photo or music files saved on the memory device are listed.
3 Press the blue button and press the ▲ or ▼ button to select Safe Remove and press the
ENTER button.
The Removing the device safe... message appears and then the USB could be
removed safe message appears.
4 Remove the USB device from the TV.
➢ ● If you enter the WISELINK mode with no USB device connected. “No external storage
device found. Check the connection status.” message will appear. In this case, insert
the USB device, exit the screen by pressing the WISELINK button on the remote
control and enter the WISELINK screen again.
● Photo and audio files must be named in English, French, or Spanish.
If not, the files can not be played. Change the file names to English, French, or
Spanish if necessary.
● Folder or file names can not exceed 128 characters. If exceeded, they won’t
function.
● The file system only supports the FAT16/32.
● Certain types of USB Digital camera and audio devices may not be compatible
with this TV.
● WISELINK supports USB Mass Storage Class (MSC) devices only.
● MSC is the device for mass storage class bulk-only transport. (e.g. thumb device,
flash card reader)
● WISELINK only supports the USB Mass Storage Class device (MSC). MSC is a Mass
Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives and
Flash Card Readers.
● Before connecting your device to the TV, please back up your files to prevent them
from damage or loss of data. SAMSUNG is not responsible for any data file damage
or data loss.
● The USB hub is not supported and you cannot use a digital camera (PTP: Picture
Transfer Protocol) and USB storage device at the same time.
● To remove a USB storage device from the TV or to turn it off (if available), exit
WISELINK first for a proper system operation.
Continued...
WISELINK
Guide
Folder 1 2007/1/2
File 1.jpg 2007/1/2
File 2.jpg 2007/1/2
File 3.jpg 2007/1/2
File 4.jpg 2007/1/2
USB  Device  Zoom  Option
Photo
Information
Safe Remove
Removing the device safe...
BP68-00628B-00Eng_4.indd 70 2007-03-02 ｿﾀﾈﾄ 4:25:21