Samsung HPT4234X-XAA - Manual (Page 34)

English - 34
Changing the Position of the PIP Window
4 Press the ▲ or ▼ button to select Position, then press the ENTER button. Press
the ▲ or ▼ button to select the desired PIP window position, then press the
ENTER button.
➢ In Double Window ( ) and Double Wide ( ) modes, Position cannot be
selected.
➢ If the PIP window is set to Double Window ( ) or Double Wide ( )
mode, the screen size or alignment may slightly differ depending on the signal
type.
Changing the PIP Channel
5 Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press
the ▲ or ▼ button at the bottom of the remote to select the desired channel in the
PIP window, then press the ENTER button.
➢ The channel can be active when the sub picture is set to TV.
Press the EXIT button to exit.
Press the PIP CH and CH and buttons on the remote control to change the PIP
channel.
Freezing the Current Picture
1 Press the STILL button to freeze a moving picture.
➢ Normal sound will still be heard. Press again to cancel.
➢ To prevent screen burn-in, this function will automatically cancel after 5
minutes.
➢ While V-Chip is in operation, the Still function cannot be used.
PIP : On
Size :
Position :
Channel : DTV Air 3 - 0
PIP T V
Enter Move Return
PIP : On
Size :
Position :
Channel : DTV Air 3 - 0
PIP T V
DTV Air 3 - 0 ▲
▲
Enter Move Return
���
�����
��
���
�����
��
BN68-01192A_Eng-1.indd 34 2007-04-30 ｿﾀﾀ・10:15:11