Samsung LS19HJBQHV-XBM - Manual (Page 12)

Use this button for power the monitor on and off, change the input source,
or perform Auto Adjustment.
Power On/Off : When you press the power button, the monitor is
on/off.
>>Click here to see an animation clip
Input Source : Press the power button until hearing the second 'beep'
sound to change from Analog to Digital.
>>Click here to see an animation clip
Auto adjustment : Press the Power button for 4 to 5 seconds. Then
with three times ' beep' sounds, Auto adjustment will be excuted.
(Analog only)
>>Click here to see an animation clip
See PowerSaver described in the manual for further information regarding power saving
functions. For energy conservation, turn your monitor OFF when it is not needed or when
leaving it unattended for long periods.
Rear
(The configuration at the back of the monitor may vary from product to product.)
Kensington Lock The Kensington lock is a device used to physically fix the system
when using it in a public place.
(The locking device has to be purchased separately.)
For using a locking device, contact where you purchase it.
DC 14V : Connect the DC adapter for your monitor to the power port on the back
of the monitor. Plug the power cord for the monitor into a nearby outlet.
DVI-I : Connect the 'DVI-A to D-Sub' Cable to the DVI port on the back of your