Mp3 encoding – Samsung YP55V-XAX User Manual
Page 19
37
MP3 Encoding
36
Connect the Audio Output port on the external audio source (or the Line
Out port) to the ENC port on the device with the Line cable.
1
Slide the switch to the ENC position begin MP3 encoding.
2
Slide the switch to the REC position while recording to stop
the encoding, and a new encoding file will be created.
●
Recording will take place in the order of L001, L002, L003…. When the recording
is finished, the files will be saved as MP3 files.
3
N
N
o
o
t
t
e
e
:
:
●
Bit Rates can be set within the range of 32Kbps~128Kbps.
●
To pause during Encoding, press the
button.
Press the button once again to recommence recording.
●
Volume can be adjusted from level 0 to 10 while monitoring the Encoding.
N
N
o
o
t
t
i
i
c
c
e
e
:
:
●
Do not disconnect the Line cable during Encoding.
●
If the battery is not charged enough, encoding will not be done.
●
Adjust the volume of the external audio source to a suitable level and encode it.
If the volume level is extremely high, the sound quality may not be good.
REC/ENC
REC/ENC
55-eng-new-australia 8/29/03 10:36 AM Page 36