Samsung LS27A750DS-ZA - Manual (Page 34)

34
Connecting and Using a Source Device
3
3 Connecting and Using a Source Device
3.3.3 Setting Optimum Resolution
An information message about setting optimum resolution will appear if you power on the product for the
first time after purchase.
Select a language and change the resolution to the optimum value.
1 Press [ ] to move to the language you want and press the [ ].
2 To hide the information message, press [ ].
z
If the optimum resolution is not selected, the message will appear up to three times for a specified
time even when the product is turned off and on again.
z The optimum resolution (1920 x 1080) can also be selected in Control Panel on your PC.
3.3.4 Changing the Resolution Using a PC
z
Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture
quality.
z The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.
Changing the Resolution on Windows XP
Go to Control Panel Display Settings and change the resolution.
DP HDMI
The optimal resolution for this monitor is as follows:
1920 x 1080 120Hz
Follow the above settings to set the resolution.
English
Language Enter
The optimal resolution for this monitor is as follows:
1920 x 1080 60Hz
Follow the above settings to set the resolution.
English
Language Enter
m
→ →
1 2 3
**** ****
**********