Samsung SPH-L900TSASPR - Manual (Page 151)

Auto Adjust Screen Tone
When Auto adjust screen tone is enabled, your device automatically analyzes the screen and
adjusts the brightness to conserve battery power.
1. Press and then tap > Settings > My Device.
2. Tap Display, and then tap the check box beside Auto adjust screen tone to enable or
disable the option.
LED Indicator Settings
The LED indicator on the front of the device displays when the device is locked, to notify you of
status changes and events. Use LED indicator settings to configure how the LED functions.
Note: The LED indicator only displays when the screen is locked.
1. Press and then tap > Settings > My Device.
2. Tap LED indicator, and then tap the check box beside options to enable or disable the
option:
 Charging: When enabled, the LED glows red during charging, and green when the
battery is fully charged.
 Low battery: When enabled, the LED blinks red to indicate low battery charge.
 Notifications: When enabled, the LED blinks blue to show that you have missed
calls, new messages, or application events.
 Voice recording: When enabled, the LED blinks blue when recording with the
screen turned off.
Sound Settings
Configure the sounds and vibrations your phone plays, for incoming calls, notifications, screen
touches, connections, and other options.
Volume
Set the system volume level, and set default volume for call ringtones, notifications, and media
playback.
Note: You can also set System volume from the home screen by pressing the Volume Key.
1. Press and then tap > Settings > My Device.
2. Tap Sound, and then tap Volume to set volume levels. Drag the sliders to set the
default volume for:
Settings 139