Samsung FPT5894WX-XAA - Manual (Page 14)

English - 14
Connecting a DVD Player/Cable Box/Satellite receiver (Set-Top Box) via DVI
This connection can only be made if there is a DVI Output jack on the external device.
1 Connect a HDMI/DVI Cable
or DVI-HDMI Adapter
between the [HDMI IN 1] jack
on the Wireless Home AV
Center and the DVI jack on
the DVD Player/Cable Box/
Satellite receiver (Set-Top
Box).
2 Connect Audio Cables
between the DVI IN (HDMI 1)
[R-AUDIO-L] jack on the
Wireless Home AV Center
and the AUDIO OUT jacks
on the DVD Player/Cable
Box/Satellite receiver (Set-
Top Box).
➢ Each DVD Player/Cable Box/Satellite receiver (Set-Top Box) has a different back
panel configuration.
➢ When connecting a DVD Player/Cable Box/Satellite receiver (Set-Top Box), match
the color of the connection terminal to the cable.
➢ When using an HDMI/DVI cable connection, you must use the HDMI IN1 terminal.
DVD Player/Cable Box/
Satellite receiver (Set-Top Box)
Rear Panel of Wireless Home AV Center
HDMI/DVI Cable (Not supplied) 1
Audio Cable (Not supplied) 2
Connecting a DVD Player/Cable Box/Satellite receiver (Set-Top Box) via HDMI
This connection can only be made if there is an HDMI Output jack on the external device. This connection will
provide the highest quality picture.
1 Connect an HDMI Cable
between the HDMI IN (1,2 or
3) on the Wireless Home AV
Center and the HDMI OUT on
the DVD Player/Cable Box/
Satellite receiver (Set-Top
Box).
What is HDMI?
• HDMI, or high-definition multimedia interface, is an interface that enables the
transmission of digital audio and video signals using a single cable.
• The difference between HDMI and DVI is that the HDMI device is smaller in size and
has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed.
➢ Each DVD Player/Cable Box/Satellite receiver (Set-Top Box) has a different back
panel configuration.
➢ When connecting via HDMI, you do not need to connect Audio Cables. You only
need to connect Audio cables when connecting via HDMI/DVI.
➢ The Wireless Home AV Center may not output sound and pictures may be
displayed with abnormal color when DVD players/Cable Boxes/Satellite receivers
supporting HDMI versions older than 1.3 are connected. When connecting an older
HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 1 jack
and the audio cables to the DVI IN (HDMI1) [R-AUDIO-L] jacks on the back of the
Wireless Home AV Center. If this happens, contact the company that provided the
DVD player/Cable Box/Satellite receiver to confirm the HDMI version, then request
an upgrade.
➢ HDMI cables that are not 1.3 may cause annoying flicker or no screen display.
➢ HDMI on this system supports all resolutions (480i/480p/720p/1080i/1080p)
HDMI Cable (Not supplied) 1
DVD Player/Cable Box/
Satellite receiver (Set-Top Box) Rear Panel of Wireless Home AV Center
BN68-01094W-01Eng.indb 14 2007-10-08 ¿АИД 6:03:52