Samsung FPT5894WX-XAA - Manual (Page 15)

English - 15
Connecting a DVD Player/Cable Box/Satellite receiver (Set-Top Box)
The rear panel jacks on your Wireless Home AV Center make it easy to connect a DVD Player/Cable Box/ Satellite
receiver (Set-Top Box).
1 Connect Component Cables
between the COMPONENT
IN (1 or 2) [Y, P
B
, P
R
] jacks on
the Wireless Home AV Center
and the COMPONENT OUT
[Y, P
B
, P
R
] jacks on the DVD
Player/Cable Box/Satellite
receiver (Set-Top Box).
2 Connect Audio Cables
between the COMPONENT
IN (1 or 2) [R-AUDIO-L] jacks
on the Wireless Home AV
Center and the AUDIO OUT
jacks on the DVD Player/
Cable Box/Satellite receiver
(Set-Top Box)
➢ Component video separates the video into Y (Luminance (brightness)), P
B
(Blue) and P
R
(Red) for enhanced video quality. Be sure to match the component
video and audio connections. For example, if connecting the video cable to
COMPONENT IN, connect the audio cable to COMPONENT IN also.
➢ Each DVD Player/Cable Box/Satellite receiver (Set-Top Box) has a different back
panel configuration.
➢ When connecting a DVD Player/Cable Box/Satellite receiver (Set-Top Box), match
the color of the connection terminal to the cable.
DVD Player/Cable Box/
Satellite receiver (Set-Top Box)
Rear Panel of Wireless Home AV Center
Component Cable (Not supplied) 1
Audio Cable (Not supplied) 2
Connecting a VCR
Video Connection
These instructions assume that you have already connected your Wireless Home AV Center to an antenna or a cable
system (according to the instructions on pages 12~13). Skip step 1 if you have not yet connected to an antenna or a
cable system.
1 Unplug the cable or antenna
from the back of the Wireless
Home AV Center.
2 Connect the cable or antenna
to the ANT IN terminal on the
back of the VCR.
3 Connect an Antenna Cable
between the ANT OUT
terminal on the VCR and
the ANT 1 IN(AIR) or ANT 2
IN (CABLE) terminal on the
Wireless Home AV Center.
4 Connect a Video Cable
between the VIDEO OUT
jack on the VCR and the AV
IN 1 [VIDEO] jack on the
Wireless Home AV Center.
5 Connect Audio Cables
between the AUDIO OUT
jacks on the VCR and the
AV IN 1 [R-AUDIO-L] jacks
on the Wireless Home AV
Center.
➢ If you have a “mono”
(non-stereo) VCR, use a Y-
connector (not supplied) to
hook up to the right and left audio input jacks of the Wireless Home AV Center.
If your VCR is stereo, you must connect two cables.
➢ Each VCR has a different back panel configuration.
➢ When connecting a VCR, match the color of the connection terminal to the cable.
VCR Rear Panel Rear Panel of Wireless Home AV Center
2
Audio Cable(Not supplied) 5
Video Cable(Not supplied) 4
Antenna cable(Not supplied) 3
Continued...
BN68-01094W-01Eng.indb 15 2007-10-08 ¿АИД 6:03:56